1050V, IEPE
The Dytran Series 1050V are an IEPE force sensors designed to measure dynamic forces from 10 lbf to 5,000 lbf over a wide frequency range. Offered with a sensitivity from 1 mV/lbf to 500 mV/lbf. As an IEPE sensor, the model 1050V6 features...
Features:
- Diameter 0.75 in
- Height 0.62 in
- 10-32 axial connector
- 1/4-28 mounting hole
- IEPE (2 to 20 mA, +18 to +30 VDC)
- Stainless steel
Manufacturer: Dytran Instruments Inc.
Quote
Datasheet
Description
Specifications
Models & Accessories
Downloads
Similar Products
1050V - Description
The Dytran Series 1050V are an IEPE force sensors designed to measure dynamic forces from 10 lbf to 5,000 lbf over a wide frequency range. Offered with a sensitivity from 1 mV/lbf to 500 mV/lbf. As an IEPE sensor, the model 1050V6 features built-in electronics, eliminating the need for an external charge amplifier and converter.
Design of the Series 1050V features a quartz sensing element, operating in compression mode and packaged in a rugged stainless steel housing weighing 32 grams. Units utilize a 10-32 axial connector and a 1/4-28 tapped hole located at the top of the sensor housing for ease of mounting.
Supplied Accessories: (2) model 6204 mounting studs (1/4-28 to 1/4-28), (1) model 6210 impact cap
1050V - Specifications
| Type | Piezoelectric |
| Application | Tension & Compression |
| Full Scale | 10 lbs |
| 50 lbs | |
| 100 lbs | |
| 500 lbs | |
| 5000 lbs | |
| Output | 5 V DC |
| Precision | ±1.0 % FS |
| Excitation | 18 - 30 V DC |
| Technology | Voltage Mode (IEPE) |
| Min Temperature | -73 °C |
| Max Temperature | 121 °C |
1050V - Models & Accessories
Models
| 1050V1 | |
| 1050V2 | |
| 1050V3 | |
| 1050V4 | |
| 1050V5 | |
| 1050V6 |
1050V - Downloads
1050V Series Load Cell 32 g Datasheet |
1050V - Similar Products
- Weight 28 grams
- Size (diameter 0.75 in, height 0.62 in)
- 10-32 radial connector
- 1/4-28 mounting hole
- IEPE (2 to 20 mA, +18 to +30 VDC)
- Stainless steel
- General purpose dynamic force measurements
| Type | Piezoelectric |
| Application | Tension & Compression |
| Full Scale | 10 lbs, 50 lbs, 100 lbs, 500 lbs, 1000 lbs, 5000 lbs |
| Output | 5 V DC |
| Precision | ±1.0 % FS |
| Excitation | 18 - 30 V DC |
- Weight 452-460 grams
- Diameter 2.00 in
- Height 1.25 in
- 10-32 axial & radial connector
- 3/8-16 tapped hole top surface
- 11/16-12 integral stem bottom surface
- IEPE (2 to 20 mA, +18 to +30 VDC)
- Stainless steel
| Type | Piezoelectric |
| Application | Tension & Compression |
| Full Scale | 500 lbs, 1000 lbs, 5000 lbs, 10000 lbs, 25000 lbs, 50000 lbs |
| Output | 5 V DC |
| Precision | ±1.0 % FS |
| Excitation | 18 - 30 V DC |
- Tension & Compression
- Titanium
- Weight: 4.5 g
- Mounting: 10-32 Tapped Holes Top & Bottom
- Linearity: ±1.0% F.S.
- Outer Diameter: 10.2mm
- Height: 12.4mm
- Hermetic
| Type | Piezoelectric |
| Application | Compression |
| Full Scale | 50 lbs |
| Output | 5 V DC |
| Precision | ±1.0 % FS |
| Excitation | 18 - 30 V DC |
- Weight 50 grams
- Size (outer diameter 1.10 in, inner diameter 0.40 in, height 0.50 in)
- Hermetic
- 10-32 radial connector
- 0.40 thru hole at center
- IEPE (2 to 20 mA, +18 to +30 VDC)
- Stainless steel
- Available in ranges of 100 LbF (1203V1)
| Type | Piezoelectric |
| Application | Compression |
| Full Scale | 100 lbs, 500 lbs, 1000 lbs, 5000 lbs, 10000 lbs |
| Output | 5 V DC |
| Precision | ±1.0 % FS |
| Excitation | 18 - 30 V DC |