A-Tech Instruments Ltd. - Weigh Kits and Mounting Accessories Load Cell & Force Sensors

Français

Toronto: 416 754 7008

Montreal: 514 695 5147

Canada: 1 888 754 7008

User:

Pass:

Now Hiring!

Weigh Kits and Mounting Accessories

Advanced

Site Map

A variety of Weigh Kits and Mounting Accessories for specific applications of load cells such as tank weighing, part contacting, etc.

Products > Sensors > Load Cell & Force > Weigh Kits and Mounting Accessories

ALCJB-A, Junction Boxes

- Aluminum Junction Box Covered with Epoxy paint
- Smallest Dimensions: 175mm x 80mm x 57mm (L x W x H)
- Level of Protection IP65
- Versions for 4, 6, 8 Load Wiring using Strain Gage Technology in 6 or 4 wires
- Corner Balancing by Potentiometers
- Tool Free Connection by Spring Clamps
- Over-voltage protection option

Datasheet

IP Rating

IP65

Models: ALCJB-A

DLCJB-A Junction Box Digital

- Connection of Digital Load Cells with RS485 Outputs (2 wire bus)
- Aluminum Junction Box Covered with Epoxy paint
- Level of Protection IP65
- Up to 8 digital load cells
- Tool Free Connection by Spring Clamps
- Over-voltage Protection
- 200mm x 100mm x 81mm (L x W x H)

Datasheet

Output

RS - 485

Models: DLCJB-A

F60X, Bending Beam Cantilever Load Cell

- Compression (One Direction)
- Material Stainless Steel
- ± 0,008% F.S. Combined Error
- Smallest Dimensions: 27.5 mm Diam., 120 mm Length
- Integral Cable 3 m
- ATEX 94/9/CE Version for Hazardous Area(optional)
- Accessories: Loading foot type LFC , Mounting kit STABIFLEX-F

Datasheet

Full Scale Range(s)

10 - 25,000 lbs

Models: F60X, F60X-Stabiflex-F

LFC/LFD Loading Foot

- Stainless Steel Construction

Datasheet

Models: LCF/LFD

LPC-Cups Kit

- Zinc Plated Steel Construction
- Integrated Anti-Spinning device

Datasheet

Models: LPC- Cups kit

LPM/LPM-X-Fastening and Cup Kit

- LPM : Zinc Plated Steel Constuction
- LPM-X : Stainless Steel
- Integrated Anti-Spinning Device
- To be used with STABICAN kit

Datasheet

Models: LPM/LPM-X

LPS-Self Aligning Kit

- Zinc Plated Steel Construction
- Integrated Anti-Spinning Device
- 2 Possible Heights (170 and 200 mm)

Datasheet

Models: LPS

R10X, Load Cell w/ Optional SILOKIT-R

- Compression (one way)
- load cell made of stainless steel sealed
- Measurement resolution up to ±0.05%; spherical load button for perfect force alignment
- ± 0,05% F.S. Combined Error
- Integral Cable 5 or 10 meters
- Accessories: SILOKIT-R
- Complete Weighing Kit for Tanks, Silos, etc.
- Silo Kit Eliminates Side Loads
Upper plate
- ATEX 94/9/EC Conformance Available

Datasheet

Full Scale Range(s)

1,000 - 250,000 lbs

Models: R10X, SILOKIT-R

SK30X, Bending Beam Cantilever Load Cell

- Compression (One Direction)
- Material Stainless Steel
- ± 0,017% or ± 0,008% F.S. Combined Error
- Smallest Dimensions: 132mm x 31.5mm x 31mm (L x W x H)
- Integral Cable 5m
- Approved up to 6000d R60 OIML and up to 5000d NTEP
- Accessories: Loading foot type LFA, Mounting kit STABIFLEX SK, Mounting kit ISOFLEX

Datasheet

Full Scale Range(s)

500 - 5,000 lbs

Models: SK30X, SK30X-STABIFLEX-SK 3, SK30X-STABIFLEX-SK 3

STABICAN-200t Mounting Kit

- Zinc Plated Steel Construction
- Integrates a Stabilization Rod and a Lift-off stop

Datasheet

Models: STABICAN-200t

STABICAN-60t

- Zinc Plated or Stainless Steel Construction
- Integrates a Stabilization Rod and a Lift- off stop
- Compact Design and Easy Installation

Datasheet

Models: STABICAN-60t

Featured

Products

3023A1, Triaxial Miniature Accelerometer

DTC-Initium, Electronic Pressure Scanners

8661, Rotary Non Contact Shaft Torque Sensor

3274A, Series Sub-Miniature Accelerometer - TEDS

Applications

Vehicle Testing - General Type Test

Mobile Vehicle Testing DAS & Analysis Software

Horse Saddle Pressure Measurement

New

Products

9307 DigiForce, Multi channel Press Force Monitor & Functional Tester

3333MT, Low Noise Triaxial Accelerometers

imc CRONOSflex (CRFX), Flexible Data Acquisition & Control Systems

Applications

Laser Scanning for In-Process Dimensional Inspection

Horse Saddle Pressure Measurement

Fibre Optic Displacement Sensors for Flight Test


Home \| Products \| Applications \| Support \| Services \| Manufacturers \| Contact Us \| About Us
© 2008 A-Tech Instruments Ltd.	Careers \| Legal

Products

Sensors

Signal Conditioning

Indicator / Controller

Notes