|
|
| Français |
| Toronto: 416 754 7008 |
| Montreal: 514 695 5147 |
| Canada: 1 888 754 7008 |
|
|
|
|
|
|
|
|
|
|
Modular
|
|
|
|
|
Multi-Channel signal conditioners available for variety of input signals offered with and without software and configuration.
Inputs from Pressure Sensors, Load Cells, TC's (Thermocouples), RTDs, LVDTs, Strain Gauge, Process Signals, 4-20ma, Analog Voltage, etc., are conditioned and producing outputs such as Voltage (+/-5 Vdc and +/-10 Vdc), Current (0 to 20ma or 4 to 20ma), for example.
Custom Signal Conditioning is available as well. | | | | | | |  | | | - Amplifiers with excitation, filter and isolation for Computers and PLCs
- Inputs: Voltage, Current, RMS, RTD, Potentiometer, Thermocouple, Strain Gauge Bridge, Piezo Electric
- Outputs: +/-10Vdc, 0-5/10Vdc, 0-1mA, 0/4-20mA
- Power: +5Vdc
- Screw Terminal connections with back panels, cables and accessories | | | Datasheet | | | Input Type | | DC Current | | Strain Gauge | | RTD | | | | Models: SCM5B30, SCM5B31, SCM5B32, SCM5B33, SCM5B34, SCM5B35... | | | |  | | | | | | Models: 5D30
, 5D40, 5D64
, 5D70
, 5D78
, 5DMB... | | | |  | | | | | | Models: 600, 611, 615, 621, 626, 628... | | | |  | | | | | | | Datasheet | | | Input Type | | DC Current | | Strain Gauge | | RTD | | | | Models: 8B, 8B30, 8B31, 8B32, 8B34, 8B35... | | | |  | | | | | | Models: SPS6000
, SPS6108
, SPS6116
, SPS6132
| | | |  | | | | | | Models: e.wave A1-8, e.wave A1-8 pac, e.wave A6-5 pac, e.wave A6-8 | | | |  | | | - Accuracy 0.01
- 4 or 16 galvanic isolated input channels
- Differential voltage, current over shunt terminal
- High accuracy digitalization: 19 bit ADC, 100 Hz sampling rate per channel,total rate 400 Hz
- 1 digital input and 1 digital output: Status, tare, reset peak hold Status, alarm, limit value, tolerance band
- Differential inputs: Common mode voltage 100 VDC
- Signal conditioning: Linearization, digital filtering, averaging, scaling, minimum/maximum, arithmetic, alarm
- RS 485 fieldbus interface: Profibus-DP, Modbus-RTU, ASCII as well as connectable to any
- Galvanic isolation of I/O-signals, power supply and interface
- Isolation voltage 500 VDC
- Electromagnetic Compatibility: according EN 61000-4 and EN 55011
- Power supply 10…30 VDC
- DIN rail mounting (EN500022) | | | | Models: ebloxx A1, ebloxx A3, ebloxx A4TC, ebloxx A5, ebloxx A5CR, ebloxx A6-2CF... | | | |  | | | Most important features
- 4 or 16 galvanic isolated input channels thermocouple and voltages ±
- High accuracy digitalization: 19 bit ADC, 100 Hz sampling rate per channel
- Differential inputs: common mode voltage 100 VDC
- Cold junction compensation: CJC per terminal strip (special terminal block required)
- Dynamic linearization: optimised positioning of the poles within the range for the types B, E, J, K, L N, R, S, T, U
- Signal conditioning: linearization, digital filtering, averaging, scaling, minimum/maximum, arithmetic, alarm
- RS 485 fieldbus interface: Profibus-DP, Modbus-RTU, ASCII as well as connectable to any
- Galvanic isolation of I/O-signals, power supply and interface
- Isolation voltage 500 VDC
- Electromagnetic Compatibility: according EN 61000-4 and EN 55011
- Power supply 10…30 VDC
- DIN rail mounting (EN500022) | | | | Models: ebloxx A1, ebloxx A3, ebloxx A4TC, ebloxx A5, ebloxx A5CR, ebloxx A6-2CF... | | | |  | | | - Inputs: Vdc, mV, mA, RTD, TC, Strain Gauge,
- LVDT, Piezo, Potentiometer, Frequency
- Outputs: +/-10Vdc, 0/4-20mA, digital I/O
- Communication: Profibus, Modbus, Ethernet, RS232/485
- Power: 10-30Vdc
- Programmable Functions, Linearization, Max/Min, Limits | | | Datasheet | | | Inputs | | Analog - DC | | Analog - AC | | Current | | | | Models: ebloxx, ebloxxA1, ebloxxA3, ebloxxA4, ebloxxA5, ebloxxA6... | | | |  | | | | | | Models: ECD20
, ECD20A
, ECD22
| | | |  | | | - 2 universal analog input channels: voltage, current, resistance, potentiometer, Pt100, Pt1000, thermocouples, measuring bridges, IEPE sensors
- Fast high accuracy digitalization: 24 bit ADC, 100 kHz sample rate per channel
- 1 digital in or output per channel:
input: state, tare, memory reset
output: state, alarm, threshold
- Signal conditioning: 16 virtual channels, linearization, digital filter, average, scaling, min/max storage, RMS, arithmetic, alarm
- TEDS: class 1 and class 2, according IEEE 1541.4
- RS485 fieldbus interface: up to 48 Mbps: LocalBus, and up to 115.2 kbps: Modbus-RTU, ASCII
- Connectable to any Test Controller: e.g. Q.gate or Q.pac
- Galvanic isolation: channel to channel to power supply and to interface. Isolation voltage 500 VDC
- Electromagnetic Compatibility: according EN 61000-4 and EN 55011
- Power supply 10…30 VDC
- DIN rail mounting (EN 50022) | | | Datasheet | | | Input | | DC Voltage | | DC Current | | Digital | | | | Models: Q bloxx A101, Q bloxx A102, Q bloxx A103, Q bloxx A104, Q bloxx A106, Q bloxx A107... | | | |  | | | | | | Models: Q bloxx A101, Q bloxx A102, Q bloxx A103, Q bloxx A104, Q bloxx A106, Q bloxx A107... | | | |  | | | - 8 x Galvanic isolated input channels
- Differential voltage, current via shunt connector
- Isolation voltage 100 VDC
- High accuracy digitalization
- 24 bit ADU, 100 Hz sample rate per channel with 8 active channels, sum sample rate 800 Hz
- 2 digital input: state, tare, memory reset
- digital output: state alarm, thresh hold
- Signal conditioning: Linearization, digital filter, average, scaling, min/max storage, arithmetic, alarm
- RS485 fieldbus-interface up to 48 Mbps: LocalBus
- up to 115.2 kbps: Modbus-RTU, ASCII
- Connectable to any Test Q.gate or Q.pac
- Galvanic isolation of I/O-signals, power supply and interface Isolation voltage 500 VDC
- Accuracy class 0.01
- Power supply 10…30 VDC
- DIN rail mounting (EN 50022) | | | | Models: Q bloxx A101, Q bloxx A102, Q bloxx A103, Q bloxx A104, Q bloxx A106, Q bloxx A107... | | | |  | | | - 8 galvanic isolated input channels thermocouples and voltages in the range of ± 80 mV. Isolation voltage 100 VDC
- Cold junction compensation: good thermal coupling by means of cold junction compensation
per connector
- Dynamic linearization: optimized positioning of the interpolation points within the selected range, type B, E, J, K, L N, R, S, T, U
- High accuracy digitalization: 24 bit ADC, 100 Hz sample rate per channel, sum sample rate 800 Hz
- Signal conditioning: digital filter, average, scaling, min/max storage, arithmetic, alarm
- RS485 fieldbus-interface:
up to 48 Mbps: LocalBus
up to 115.2 kbps: Modbus-RTU, ASCII
- Connectable to any Test Controller: e.g. Q.gate or Q.pac
- Galvanic isolation: channels to power supply and to interface. Isolation voltage 500 VDC
- Electromagnetic Compatibility: according EN 61000-4 and EN 55011
- Accuracy class 0,01
- Power supply 10…30 VDC
- DIN rail mounting (EN 50022) | | | | Models: Q bloxx A101, Q bloxx A102, Q bloxx A103, Q bloxx A104, Q bloxx A106, Q bloxx A107... | | | |  | | | | | | Models: Q bloxx A101, Q bloxx A102, Q bloxx A103, Q bloxx A104, Q bloxx A106, Q bloxx A107... | | | |  | | | - 4 universal analog input channels: voltage, current, resistance, potentiometer, Pt100, Pt1000, thermocouples, measuring bridges
- Fast high accuracy digitalization: 24 bit ADC, 10 kHz sample rate per channel
- Signal conditioning: 16 virtual channels, linearization, digital filter, average, scaling, min/max storage, RMS, arithmetic, alarm
- RS485 fieldbus interface:
up to 48 Mbps: LocalBus
up to 115.2 kbps: Modbus-RTU, ASCII
- Connectable to any Test Controller: e.g. Q.gate or Q.pac
- Galvanic isolation: channel to channel to power supply and to interface. Isolation voltage 500 VDC
- Electromagnetic Compatibility: according EN 61000-4 and EN 55011
- Power supply 10…30 VDC
- DIN rail mounting (EN 50022) | | | Datasheet | | | Input | | DC Voltage | | DC Current | | Digital | | | | Models: A102, A104, A108, A109, D101, Q bloxx A106... | | | |  | | | - 8 galvanic isolated input channels: differential voltage, current via shunt connector; Isolation voltage 500 VDC
- Fast and high accuracy digitalization: 24 bit ADC, 10 kHz sample rate per channel with 8 active channels
- 2 digital in and 2 outputs:
input: state, tare, memory reset
output: state, alarm, threshold
- Signal conditioning: linearization, digital filter, average, scaling,
min/max storage, RMS, arithmetic, alarm
- RS485 fieldbus-interface:
up to 48 Mbps: LocalBus
up to 115,2 kbps: Modbus-RTU, ASCII
- Connectable to any Test Controller: e.g. Q.gate or Q.pac
- Galvanic isolation: channel to channel to power supply and to interface. Isolation voltage 500 VDC
- Electromagnetic Compatibility: according EN 61000-4 and EN 55011
- Accuracy class 0,01
- Power supply 10…30 VDC
- DIN rail mounting (EN 50022 rail) | | | Datasheet | | | Input | | DC Voltage | | Digital | | Thermocouple | | | | Models: Q bloxx A101, Q bloxx A102, Q bloxx A103, Q bloxx A104, Q bloxx A106, Q bloxx A107... | | | |  | | | - 4 galvanic isolated analog output channels voltage ±10 V, current 0…20 mA selectable; Isolation voltage 500 VDC permanent
- DAC-resolution 16 bit: 100 kHz each channels
- 4 digital inputs and 4 digital outputs: Configurable as 2 counter, 2 frequency, or 2 PWM inputs, 4 frequency out, 4 PWM output, or 4 state out
- Frequency in and outputs: frequency measurement up to 1 MHz (Chronos method), frequency output up to 10 kHz
- Counter: For/backward counter, quadrature counter with reference zero recognition (reset/enable), up to 1 MHz
- PWM in and output: measurement of duty cycle and frequency, output with variable
frequency and/or duty cycle
- Outputs freely scalable
- RS485 fieldbus-interface: up to 48 Mbps: LocalBus, up to 115.2 kbps: Modbus-RTU, ASCII
- Galvanic isolation: I/O-signals to power supply and to interface. Isolation voltage 500 VDC
- Electromagnetic Compatibility: according EN 61000-4 and EN 55011
- Power supply 10…30 VDC
- DIN rail mounting (EN 50022) | | | Datasheet | | | Inputs | | Analog - DC | | Analog - AC | | Digital | | | | Models: Q bloxx A101, Q bloxx A102, Q bloxx A103, Q bloxx A104, Q bloxx A106, Q bloxx A107... | | | |  | | | - 4 high galvanic isolated input channels differential voltage, current via shunt connector, isolation voltage 1200 VDC permanenT
- 3 measuring ranges selectable each channel: ±10 V, ±1.25 V, ±100 mV
- Fast high accuracy digitalization: 24 bit ADC, 10 kHz sample rate per channel
- Signal conditioning: linearization, digital filter, average, scaling, min/max storage, arithmetic, alarm
- RS485 fieldbus interface:
Up to 48 Mbps: LocalBus
Up to 115.2 kbps: Modbus-RTU, ASCII
- Connectable to any Test Controller e.g. Q.gate or Q.pac
- Galvanic isolation: channel to channel to power supply and to interface isolation voltage 1200 VDC / 858 VACrms. Test voltage 5 kVrms over 1 minute
- Electromagnetic Compatibility: according EN 61000-4 and EN 55011
- Power supply 10…30 VDC
- DIN rail mounting (EN 50022) | | | | Models: Q bloxx A101, Q bloxx A102, Q bloxx A103, Q bloxx A104, Q bloxx A106, Q bloxx A107... | | | |  | | | - 4 high galvanic isolated input channels thermocouple on high voltage potential (not isolated), isolation voltage 1200 VDC permanent
- Cold junction compensation: each channel on board
- Dynamic linearization: optimized positioning of the interpolation points within the selected range, type B, E, J, K, L N, R, S, T, U
- Fast high accuracy digitalization: 24 bit ADC, 10 kHz sample rate per channel
- Signal conditioning: linearization, digital filter, average, scaling, min/max storage, arithmetic, alarm
- RS485 fieldbus interface:
Up to 48 Mbps: LocalBus
Up to 115.2 kbps: Modbus-RTU, ASCII
- Connectable to any Test Controller e.g. Q.gate or Q.pac
- Galvanic isolation: channel to channel to power supply and to interface
isolation voltage 1200 VDC / 858 VACrms, test voltage 5 kVrms over 1 minute
- Electromagnetic Compatibility: according EN 61000-4 and EN 55011
- Power supply 10…30 VDC
- DIN rail mounting (EN 50022) | | | | Models: Q bloxx A101, Q bloxx A102, Q bloxx A103, Q bloxx A104, Q bloxx A106, Q bloxx A107... | | | |  | | | - 4 high galvanic isolated input channels differential voltage, isolation voltage 1200 VDC permanent
- 4 measuring ranges selectable each channel: ±40 V; ±120 V, ±400 V, ±1200 V
- Fast high accuracy digitalization: 24 bit ADC, 50 kHz sample rate per channel with 4 active channels, 100 kHz sample rate per channel with 2 active channels
- Signal conditioning: linearization, digital filter, average, scaling, min/max storage, RMS, arithmetic, alarm
- RS485 fieldbus interface:
Up to 48 Mbps: LocalBus
Up to 115.2 kbps: Modbus-RTU, ASCII
- Connectable to any Test Controller e.g. Q.gate or Q.pac
- Galvanic isolation: channel to channel to power supply and to interface. Isolation voltage 1200 VDC / 858 VACrms. Test voltage 5 kVrms over 1 minute.
- Electromagnetic Compatibility: according EN 61000-4 and EN 55011
- Power supply 10…30 VDC
- DIN rail mounting (EN 50022) | | | | Models: Q bloxx A101, Q bloxx A102, Q bloxx A103, Q bloxx A104, Q bloxx A106, Q bloxx A107... | | | |  | | | | | | Models: Q bloxx D101, Q bloxx D104, Q bloxx D105 | | | |  | | | | | | Models: Q bloxx D101, Q bloxx D104, Q bloxx D105 | | | |  | | | | | | Models: Q bloxx D101, Q bloxx D104, Q bloxx D105 | | | |  | | | Features of the System:
- High density and flexibility: up to 16 modules in one system in any constellation,
flexible plug selection
- Test Controller inclusive: Ethernet TCP/IP for configuration and data transfer, 90 MByte data memory, expandable by USB device, logging features, PAC functionality, IRIG synchronization
- Robust and reliable: stable and compact aluminum housing, easy to carry electromagnetic compatibility according EN 61000-4 and EN 55011. Temperature range -20 up to +60°C and power supply 10 up to 30 VDC
Features of the Module A124:
- 4 high galvanic isolated input channels: thermocouple on high voltage potential (not isolated), isolation voltage 1200 VDC permanent
- Cold junction compensation: each channel on board
- Dynamic linearization: optimized positioning of the interpolation points
- High accuracy digitalization: 24 bit ADC, 10 kHz sample rate per channel
- Signal conditioning: digital filter, average, scaling, min/max storage, arithmetic, alarm
- Galvanic isolation: channel to channel to power supply and to interface, isolation voltage 1200 VDC / 858 VACrms. Test voltage 5 kVrms over 1 minute | | | | Models: Q brixx A101, Q brixx A102, Q brixx A103, Q brixx A104, Q brixx A106, Q brixx A107... | | | |  | | | System Features
- High density and flexibility: up to 16 modules in one system in any constellation,
flexible plug selection
- Test Controller inclusive: Ethernet TCP/IP for configuration and data transfer, 16 MByte data memory, expandable by USB device, logging features, PAC functionality, IRIG synchronization
- Robust and reliable: stable and compact aluminum housing, easy to carry electromagnetic compatibility according EN 61000-4 and EN 55011. Temperature range -20 up to +60°C and power supply 10 up to 30 VDC
Features of the module A101
- 2 universal analog input channels: voltage, current, resistance, potentiometer, Pt100, Pt1000, thermocouples, full and half bridges, IEPE-sensors
- Fast high accuracy digitalization: 24 bit ADC, 100 kHz sample rate per channel
- 1 digital in or output per channel
input: state, tare, memory reset, alarm threshold
output: state alarm, threshold
- Signal conditioning: virtual channels, linearization, digital filter, average, scaling, min/max storage, RMS, arithmetic, alarm
- TEDS: class 1 and class 2, according IEEE 1541.4
- Galvanic isolation: channel to channel to power supply and to interface, Viso 500 VDC | | | Datasheet | | | Input | | DC Voltage | | DC Current | | Digital | | | | Models: Q brixx A101, Q brixx A102, Q brixx A103, Q brixx A104, Q brixx A106, Q brixx A107... | | | |  | | | Important System Features:
- High density and flexibility: up to 16 modules in one system in any constellation, flexible plug selection
- Test Controller inclusive: Ethernet TCP/IP for configuration and data transfer, 16 MByte data memory, expandable by USB device, logging features, PAC functionality, IRIG synchronization
- Robust and reliable: stable and compact aluminum housing, easy to carry electromagnetic compatibility according EN 61000-4 and EN 55011. Temperature range -20 up to +60°C. Power supply 10 up to 30 VDC.
Features of the Module A102
- 1 analog input channel: measuring bridge (full, half, quarter), IEPE-sensor, voltage, current
- 1 analog output: voltage ±10 V and current 0 up to 25 mA selectable, 100 kHz
- Fast high accuracy digitalization: 19 Bit ADC - SAR (without delay time), 100 kHz sample rate
- 4 digital inputs, 2 digital outputs:
input: state, tare, memory reset
output: state, alarm, threshold
- Signal conditioning: 32 virtual channels, linearization, digital filter, average, scaling, min/max storage, RMS, arithmetic, alarm
- TEDS: class 1 and class 2, according IEEE 1541.4
- Galvanic isolation: channel to power supply and to interface, V iso 500 VDC | | | | Models: Q brixx A101, Q brixx A102, Q brixx A103, Q brixx A104, Q brixx A106, Q brixx A107... | | | |  | | | Features of the System:
- High density and flexibility up to 16 modules in one system in any constellation, flexible plug selection
- Test Controller inclusive: Ethernet TCP/IP for configuration and data transfer, 16 MByte data memory, expandable by USB device, logging features, PAC functionality, IRIG synchronization
- Robust and reliable: stable and compact aluminum housing, easy to carry. Electromagnetic compatibility according EN 61000-4 amd EM 55011. Temperature range -20 up to +60°C, power supply 10 up to 30 VDC.
Features of the Module A103
- 8 galvanic isolated input channels: differential voltage, current via shunt connector. Isolation voltage 100 VDC
- High accuracy digitalization: 24 bit ADC, 100 Hz sample rate per channel with 8 active channels, sum sample rate 800 Hz
- 2 digital in and 2 outputs:
input: state, tare, memory reset
output: state, alarm, threshold
- Signal conditioning: linearization, digital filter, average, scaling, min/max storage, arithmetic, alarm
- Galvanic isolation: channels to power supply and to interface V iso 500 VDC | | | Datasheet | | | Inputs | | Analog - DC | | Analog - AC | | Digital | | | | Models: Q brixx A101, Q brixx A102, Q brixx A103, Q brixx A104, Q brixx A106, Q brixx A107... | | | |  | | | Features of the system:
- High density and flexibility: up to 16 modules in one system in any constellation, flexible plug selection
- Test Controller inclusive: Ethernet TCP/IP for configuration and data transfer,
16 MByte data memory, expandable by USB device, logging features, PAC functionality, IRIG synchronization
- Robust and reliable: stable and compact aluminum housing, easy to carry, electromagnetic compatibility according EN 61000-4 and EN 55011. Temperature range -20 up to +60°C, power supply 10 up to 30 VDC.
Features of the Module A104:
- 8 galvanic isolated input channels: thermocouples and voltages in the range of ± 80 mV. Isolation voltage 100 VDC
- Cold junction compensation: good thermal coupling by means of cold junction compensation
- Dynamic linearization: optimized positioning of the interpolation points within the selected range, type B, E, J, K, L N, R, S, T, U
- High accuracy digitalization: 24 bit ADC, 100 Hz sample rate per channel, sum sample rate 800 Hz
- Signal conditioning: digital filter, average, scaling, min/max storage, arithmetic, alarm
- Galvanic isolation: channels, power supply and interface, V iso 500 VDC | | | | Models: Q brixx A101, Q brixx A102, Q brixx A103, Q brixx A104, Q brixx A106, Q brixx A107... | | | |  | | | Features of the System:
- High density and flexibility: up to 16 modules in one system in any constellation, flexible plug selection
- Test Controller inclusive: Ethernet TCP/IP for configuration and data transfer,
16 MByte data memory, expandable by USB device, logging features, PAC functionality, IRIG synchronization
- Robust and reliable: stable and compact aluminum housing, easy to carry electromagnetic compatibility according EN 61000-4 and EN 55011. Temperature range -20 up to +60°C, power supply 10 up to 30 VDC
Features of the Module A106
- 2 analog input channels: strain gauge and inductive bridges (full, half, Quarter), LVDT, RVDT
- DC and carrier frequency principle selectable. Bridge excitation: DC or CF 600 Hz or CF 4800 Hz; 2.5V or 5V
- 2 analog outputs: voltage ±10 V, 10 kHz
- Fast high accuracy digitalization: 24 bit ADC, 10 kHz sample rate per channel
- 4 digital I/Os
input: state, tare, memory reset, alarm, threshold
output: state alarm, threshold
- Signal conditioning: virtual channels, linearization, digital filter, average, scaling, min/max storage, RMS, arithmetic, alarm
- Galvanic isolation: channel to channel to power supply and interface Viso 500 VDC | | | Datasheet | | | Inputs | | Analog - DC | | Strain Gauge | | LVDT | | | | Models: Q brixx A101, Q brixx A102, Q brixx A103, Q brixx A104, Q brixx A106, Q brixx A107... | | | |  | | | Features of the System
- High density and flexibility: up to 16 modules in one system in any constellation, flexible plug selection
- Test Controller inclusive: Ethernet TCP/IP for configuration and data transfer, 16 MByte data memory, expandable by USB device, logging features, PAC functionality, IRIG synchronization
- Robust and reliable: stable and compact aluminum housing, easy to carry electromagnetic compatibility according EN 61000-4 and EN 55011. Temperature range -20 up to +60°C, power supply 10 up to 30 VDC
Features of the Module A107
- 4 universal analog input channels: voltage, current, resistance, potentiometer, Pt100, Pt1000, thermocouples, measuring bridges
- Fast high accuracy digitalization: 24 bit ADC, 10 kHz sample rate per channel
- Signal conditioning: 16 virtual channels, linearization, digital filter, average, scaling, min/max storage, RMS, arithmetic, alarm
- Galvanic isolation: channel to channel to power supply and to interface Viso 500 VDC | | | Datasheet | | | Inputs | | Analog - DC | | Analog - AC | | Thermocouple | | | | Models: Q brixx A101, Q brixx A102, Q brixx A103, Q brixx A104, Q brixx A106, Q brixx A107... | | | |  | | | Features of the System:
- High density and flexibility: up to 16 modules in one system in any constellation, flexible plug selection
- Test Controller inclusive
Ethernet TCP/IP for configuration and data transfer, 16 MByte data memory, expandable by USB device, logging features, PAC functionality, IRIG synchronization
- Robust and reliable: stable and compact aluminum housing, easy to carry electromagnetic compatibility according EN 61000-4 and EN 55011. Temperature range -20 up to +60°C, power supply 10 up to 30 VDC
Features of the Module A108
- 8 galvanic isolated input channels: differential voltage, current via shunt connector. Isolation voltage 100 VDC
- High accuracy digitalization: 24 bit ADC, 10 kHz sample rate per channel with 8 active channels, sum sample rate 80 kHz
- 2 digital in and 2 outputs:
input: state, tare, memory reset
output: state, alarm, threshold
- Signal conditioning: linearization, digital filter, average, scaling,
min/max storage, RMS, arithmetic, alarm
- Galvanic isolation: channel to channel to power supply and to interface, Viso 500 VDC | | | Datasheet | | | Inputs | | Analog - DC | | Analog - AC | | Digital | | | | Models: Q brixx A101, Q brixx A102, Q brixx A103, Q brixx A104, Q brixx A106, Q brixx A107... | | | |  | | | Features of the System
- High density and flexibility: up to 16 modules in one system in any constellation,
flexible plug selection
- Test Controller inclusive: Ethernet TCP/IP for configuration and data transfer, 16 MByte data memory, expandable by USB device, logging features, PAC functionality, IRIG synchronization
- Robust and reliable: stable and compact aluminum housing, easy to carry electromagnetic compatibility according EN 61000-4 and EN 55011. Temperature range -20 up to +60°C. Power supply 10 up to 30 VDC
Features of the Module A109
- 4 galvanic isolated analog output channels: voltage ±10 V, current 0…20 mA selectable, isolation voltage 500 VDC
- DAC-resolution 16 bit: 100 kHz with 1 channel, 10 kHz with 4 channels
- 4 digital inputs and 4 digital outputs. Configurable as 2 counter, 2 frequency, or 2 PWM inputs, 4 frequency out, 4 PWM output or 4 state out
- Frequency in and outputs: frequency measurement up to 1 MHz (Chronos), frequency output up to 10 kHz
- Counter: For/backward counter, quadrature counter with reference zero recognition (reset/enable), up to 1 mHz
- PWM in and output: measurement of duty cycle and frequency | | | | Models: Q brixx A101, Q brixx A102, Q brixx A103, Q brixx A104, Q brixx A106, Q brixx A107... | | | |  | | | Features of the System
- High density and flexibility: up to 16 modules in one system in any constellation, flexible plug selection
- Test Controller inclusive: Ethernet TCP/IP for configuration and data transfer, 16 MByte data memory, expandable by USB device, logging features, PAC functionality, IRIG synchronization
- Robust and reliable: stable and compact aluminum housing, easy to carry electromagnetic compatibility according EN 61000-4 and EN 55011. Temperature range -20 up to +60°C. Power supply 10 up to 30 VDC
Features of the Module A123
- 4 high galvanic isolated input channels: differential voltage, current via shunt connector, isolation voltage 1200 VDC permanent
- 3 measuring ranges selectable each channel: ±10 V, ±1.25 V, ±100 mV
- Fast high accuracy digitalization: 24 bit ADC, 10 kHz sample rate per channel
- Signal conditioning: linearization, digital filter, average, scaling,
min/max storage, arithmetic, and alarm
- Galvanic isolation: channel to channel to power supply and to interface. Isolation voltage 1200 VDC / 858 VACrms. Test voltage 5 kVrms over 1 minute. | | | Datasheet | | | Inputs | | Analog - DC | | Analog - AC | | Digital | | | | Models: Q brixx A101, Q brixx A102, Q brixx A103, Q brixx A104, Q brixx A106, Q brixx A107... | | | |  | | | Features of the System:
- High density and flexibility: up to 16 modules in one system in any constellation, flexible plug selection
- Test Controller inclusive: Ethernet TCP/IP for configuration and data transfer, 16 MByte data memory, expandable by USB device, logging features, PAC functionality, IRIG synchronization
- Robust and reliable: stable and compact aluminum housing, easy to carry. Electromagnetic compatibility according EN 61000-4 and EN 55011. Temperature range -20 up to +60°C. Power supply 10 up to 30 VDC
Features of the module A128:
- 4 high galvanic isolated input channels: differential voltage, isolation voltage 1200 VDC permanent
- 4 measuring ranges selectable each channel: ±40 V; ±120 V, ±400 V, ±1200 V
- Fast high accuracy digitalization: 24 bit ADC, 50 kHz sample rate per channel with 4 active channels, 100 kHz sample rate per channel with 2 active channels
- Signal conditioning: linearization, digital filter, average, scaling, min/max storage, RMS, arithmetic, alarm
- Galvanic isolation: channel to channel to power supply and to interface. Isolation voltage 1200 VDC / 858 VACrms. Test voltage 5 kVrms over 1 minute | | | | Models: Q brixx A101, Q brixx A102, Q brixx A103, Q brixx A104, Q brixx A106, Q brixx A107... | | | |  | | | Features of the system:
- High density and flexibility: up to 16 modules in one system in any constellation,
flexible plug selection
- Test Controller inclusive: Ethernet TCP/IP for configuration and data transfer, 90 MByte data memory, expandable by USB device, logging features, PAC functionality, IRIG synchronization
- Robust and reliable: stable and compact aluminum housing, easy to carry. Electromagnetic compatibility according EN 61000-4 and EN 55011
- Temperature range -20 up to +60°C, power supply 10 up to 30 VDC
Features of the module D101:
- 8 digital inputs and 8 digital outputs: configurable as counter, frequency, PWM and time inputs, frequency or PWM output, state in or output
- State in and outputs: process- and host controlled
- Frequency in and outputs, time measurement: frequency measurement up to 1 MHz (Chronos method), frequency output up to 10 kHz
- Counter: for/backward counter, quadrature counter with reference zero recognition (reset/enable), up to 1 mHz
- PWM in and outputs: measurement of duty cycle and frequency, output with variable frequency and/or duty cycle | | | | Models: Q brixx D101 | | | |  | | | Most important features of the system:
- High density and flexibility: up to 16 plug-in modules in one system in any constellation, flexible plug selection
- Test Controller inclusive: Ethernet TCP/IP for configuration and data transfer,
16 MByte data memory, expandable by USB device, logging features, PAC functionality, IRIG synchronization
- Robust and reliable: stable and compact aluminum housing, easy to carry. Electromagnetic compatibility according EN 61000-4 and EN 55011. Temperature range -20 up to +60°C. Power supply 10 up to 30 VDC.
Features of the Plug-in A101:
- 2 universal analog input channels: voltage, current, resistance, potentiometer, Pt100, Pt1000, thermocouples, full and half bridges, IEPE-sensors
- Fast high accuracy digitalization: 24 bit ADC, 100 kHz sample rate per channel
- 1 digital in or output per channel:
input: state, tare, memory reset, alarm, threshold
output: state alarm, threshold
- Signal conditioning: virtual channels, linearization, digital filter, average, scaling, min/max storage, RMS, arithmetic, alarm
- TEDS: class 1 and class 2, according IEEE 1541.4
- Galvanic isolation: channel to channel to power supply and to interface, Viso 500 VDC | | | Datasheet | | | Inputs | | Thermocouple | | Strain Gauge | | Digital | | | | Models: Q raxx A101, Q raxx A102, Q raxx A103, Q raxx A104, Q raxx A106, Q raxx A107... | | | |  | | | Most important features:
- 8 universal analog input channels: voltage, current, resistance, potentiometer, Pt100, Pt1000, thermocouples, full and half bridges, IEPE-sensors
- Fast high accuracy digitalization: 24 bit ADC, 100 kHz sample rate per channel
- Signal conditioning: virtual channels, linearization, digital filter, average, scaling, min/max storage, RMS, arithmetic, alarm
- Galvanic isolation: channel to channel to power supply and to interface,
Viso 500 VDC
- Electromagnetic Compatibility: according EN 61000-4 and EN 55011
- Power supply 10…30 VDC
Features with the Embedded Test Controller (version EC):
- Optional fieldbus interface EtherCAT: EtherCAT according specification ETG, 256 read and 256 write variable with 10 kHz
- Ethernet interface for configuration and data output: FTP, TCP/IP, UDP
- FTP Server and FTP Client functionality configurable function
- High data rate over Ethernet:
16 real variables with 10 kHz (block transfer)
64 real variables with 300 Hz (online)
- Data buffer memory dyn. 16 MByte (RAM), stat. 128 MByte (flash): data buffer at block transfer of measurements
- Connection of additional racks to the Test Controller: up to 3 slimline racks without Test Controller can be connected to a slimline EC system with embedded controller | | | Datasheet | | | Inputs | | Current | | Thermocouple | | Strain Gauge | | | | Models: Q raxx A101-8SL, Q raxx A104-16SL, Q raxx A106-8SL, Q raxx A107-16SL, Q raxx A108-16SL | | | |  | | | Features of the System:
- High density and flexibility: up to 16 plug-in modules in one system in any constellation, flexible plug selection
- Test Controller inclusive: Ethernet TCP/IP for configuration and data transfer, 16 MByte data memory, expandable by USB device, logging features, PAC functionality, IRIG synchronization
- Robust and reliable: stable and compact aluminum housing, easy to carry. Electromagnetic compatibility according EN 61000-4 and EN 55011. Temperature range -20 up to +60°C. Power supply 10 up to 30 VDC
Features of the Plug-In A102:
- 1 analog input channel: measuring bridge (full, half, quarter), IEPE-sensors, voltage, current
- 1 analog output: voltage ±10 V and current 0 up to 25 mA selectable, 100 kHz
- Fast high accuracy digitalization: 19 Bit ADC - SAR (without delay time), 100 kHz sample rate
- 4 digital inputs, 2 digital outputs
input: state, tare, memory reset, output: state, alarm, threshold
- Signal conditioning: 32 virtual channels, linearization, digital filter, average, scaling, min/max storage, RMS, arithmetic, alarm
- TEDS: class 1 and class 2, according IEEE 1541.4
- Galvanic isolation: channel to power supply and to interface, Viso 500 VDC | | | | Models: Q raxx A101, Q raxx A101-8SL, Q raxx A102, Q raxx A103, Q raxx A104, Q raxx A104-16SL... | | | |  | | | System Features:
- High density and flexibility: up to 16 plug-in modules in one system in any constellation, flexible plug selection
- Test Controller inclusive: Ethernet TCP/IP for configuration and data transfer, 16 MByte data memory, expandable by USB device, logging features, PAC functionality, IRIG synchronization
- Robust and reliable: stable and compact aluminum housing, easy to carry. Electromagnetic compatibility according EN 61000-4 and EN 55011.
- Temperature range -20 up to +60°C
- Power supply 10 up to 30 VDC
Features of the Plug-in A103:
- 8 galvanic isolated input channels: differential voltage, current via shunt connector. Isolation voltage 100 VDC
- High accuracy digitalization: 24 bit ADC, 100 Hz sample rate per channel with 8 active channels, sum sample rate 800 Hz
- 2 digital in and 2 outputs
input: state, tare, memory reset
output: state, alarm, threshold
- Signal conditioning: linearization, digital filter, average, scaling, min/max storage, arithmetic, alarm
- Galvanic isolation: channels to power supply and to interface, Viso 500 VDC | | | | Models: Q raxx A101, Q raxx A101-8SL, Q raxx A102, Q raxx A103, Q raxx A104, Q raxx A104-16SL... | | | |  | | | Features of the System:
- High density and flexibility: up to 16 plug-in modules in one system in any constellation, flexible plug selection
- Test Controller inclusive: Ethernet TCP/IP for configuration and data transfer, 16 MByte data memory, expandable by USB device, logging features, PAC functionality, IRIG synchronization
- Robust and reliable: stable and compact aluminum housing, easy to carry. Electromagnetic compatibility according EN 61000-4 and EN 55011. Temperature range -20 up to +60°C and power supply 10 up to 30 VDC
Features of the Plug-in A104:
- 8 galvanic isolated input channels: thermocouples and voltages in the range of ±80 mV. Isolation voltage 100 VDC
- Cold junction compensation: good thermal coupling by means of cold junction compensation
- Dynamic linearization: optimized positioning of the interpolation points within the selected range, type B, E, J, K, L N, R, S, T, U
- High accuracy digitalization: 24 bit ADC, 100 Hz sample rate per channel, sum sample rate 800 Hz
- Signal conditioning: digital filter, average, scaling, min/max storage, arithmetic, alarm
- Galvanic isolation: channels, power supply and interface, Viso 500 VDC | | | Datasheet | | | Inputs | | Analog - DC | | Thermocouple | | Digital | | | | Models: Q raxx A101, Q raxx A101-8SL, Q raxx A102, Q raxx A103, Q raxx A104, Q raxx A104-16SL... | | | | | | | | Most important features:
16 galvanic isolated input channels
thermocouples and voltages in the range of ±80 mV
Cold junction compensation
Integrated CJC each input
High accuracy digitalization
24 bit ADC, 100 Hz sample rate per channel,
sum sample rate 1600 Hz
Dynamic linearization
optimized positioning of the interpolation points within the
selected range, type B, E, J, K, L N, R, S, T, U
Galvanic isolation
channels to power supply and to interface,
Viso 500 VDC
Electromagnetic Compatibility
according EN 61000-4 and EN 55011
Power supply 10…30 VDC
With embedded Test Controller (version EC):
Optional fieldbus interface EtherCAT
EtherCAT according specification ETG,
256 read and 256 write variable with 10 kHz
Ethernet interface for configuration and data output
FTP, TCP/IP, UDP
FTP Server and FTP Client functionality
configurable function
High data rate over Ethernet
16 real variables with 10 kHz (block transfer)
64 real variables with 300 Hz (online
Data buffer memory dyn. 16 MByte (RAM), stat. 128 MByte (flash)
data buffer at block transfer of measurements
Connection of additional racks to the Test Controller
up to 3 slimline racks without Test Controller can be connected to a
slimline EC system with embedded controller | | | | Models: Q raxx A101, Q raxx A101-8SL, Q raxx A102, Q raxx A103, Q raxx A104, Q raxx A104-16SL... | | | |  | | | Features of the System:
- High density and flexibility: up to 16 plug-in modules in one system in any constellation, flexible plug selection
- Test Controller inclusive: Ethernet TCP/IP for configuration and data transfer, 16 MByte data memory, expandable by USB device, logging features, PAC functionality, IRIG synchronization
- Robust and reliable: stable and compact aluminum housing, easy to carry. Electromagnetic compatibility according EN 61000-4 and EN 55011. Temperature range -20 up to +60°C, power supply 10 up to 30 VDC
Features of the Plug-in A106:
- 2 analog input channels: strain gauge and inductive bridges (full, half, quarter), LVDT, RVDT
- DC and carrier frequency principle selectable: bridge excitation: DC or CF 600 Hz or CF 4800 Hz; 2.5 V or 5 V
- 2 analog outputs: voltage ±10 V, 10 kHz
- Fast high accuracy digitalization: 24 bit ADC, 10 kHz sample rate per channel
- 4 digital I/Os
input: state, tare, memory reset, alarm, threshold,
output: state alarm, thresh hold
- Signal conditioning: virtual channels, linearization, digital filter, average, scaling, min/max storage, RMS, arithmetic, alarm
- Galvanic isolation: channel to channel to power supply and interface, Viso 500 VDC | | | | Models: Q raxx A101, Q raxx A101-8SL, Q raxx A102, Q raxx A103, Q raxx A104, Q raxx A104-16SL... | | | |  | | | Features:
- 8 analog input channels for bridges: strain gauge and inductive bridges (full, half, quarter), LVDT, RVDT
- DC and carrier frequency principle selectable: DC bridge excitation, AC 600 Hz and 4.8 kHz bridge excitation
- Fast high accuracy digitalization: 24 bit ADU, 10 kHz sample rate per channel
- Signal conditioning: linearization, digital filter, average, scaling, min/max storage, arithmetic, alarm
- 1 analog output per channel: voltage ±10 V, 10 kHz
- Galvanic isolation of analog in/out, power supply and interface, Viso 500 VDC
- Power supply 10…30 VDC
Features with Embedded Test Controller (version EC):
- Optional fieldbus interface EtherCAT: EtherCAT according specification ETG, 256 read and 256 write variable with 10 kHz
- Ethernet interface for configuration and data output: FTP, TCP/IP, UDP
- FTP Server and FTP Client functionality: configurable function
- High data rate over Ethernet:
16 real variables with 10 kHz (block transfer)
64 real variables with 300 Hz (online)
- Data buffer memory dyn. 16 MByte (RAM), stat. 128 MByte (flash): data buffer at block transfer of measurements
- Connection of additional racks to the Test Controller: up to 3 slimline racks without Test Controller can be connected to a slimline EC system with embedded controller | | | | Models: Q raxx A101, Q raxx A101-8SL, Q raxx A102, Q raxx A103, Q raxx A104, Q raxx A104-16SL... | | | |  | | | Features of the System
- High density and flexibility: up to 16 plug-in modules in one system in any constellation, flexible plug selection
- Test Controller inclusive: Ethernet TCP/IP for configuration and data transfer, 16 MByte data memory, expandable by USB device, logging features, PAC functionality, IRIG synchronization
- Robust and reliable: stable and compact aluminum housing, easy to carry electromagnetic compatibility according EN 61000-4 and EN 55011. Temperature range -20 up to +60°C. Power supply 10 up to 30 VDC
Features of the Plug-in A107:
- 4 universal analog input channels: voltage, current, resistance, potentiometer, Pt100, Pt1000, thermocouples, measuring bridges
- Fast high accuracy digitalization: 24 bit ADC, 10 kHz sample rate per channel
- Signal conditioning: 16 virtual channels, linearization, digital filter, average, scaling, min/max storage, RMS, arithmetic, alarm
- Galvanic isolation of channel to channel to power supply and to interface Viso 500 VDC | | | Datasheet | | | Inputs | | Analog - DC | | Analog - AC | | Current | | | | Models: Q raxx A101, Q raxx A101-8SL, Q raxx A102, Q raxx A103, Q raxx A104, Q raxx A104-16SL... | | | |  | | | Important Features:
- 16 universal analog input channels: voltage, current, resistance, potentiometer, Pt100, Pt1000, thermocouples, measuring bridges
- Fast high accuracy digitalization: 24 bit ADC, 10 kHz sample rate per channel
- Signal conditioning: Linearization, digital filter, average, scaling, min/max storage, RMS, arithmetic, alarm
- Galvanic isolation: Kanal II Versorgung II Schnittstelle, Viso 500 VDC. Power supply and interface, Viso 500 VDC
- Power supply 10…30 VDC
Features with the Embedded Test Controller (version EC):
- Optional fieldbus interface EtherCAT: EtherCAT according specification ETG, 256 read and 256 write variable with 10 kHz
- Ethernet interface for configuration and data output: FTP, TCP/IP, UDP
- FTP Server and FTP Client functionality: configurable function
- High data rate over Ethernet:
16 real variables with 10 kHz (block transfer)
64 real variables with 300 Hz (online)
- Data buffer memory dyn. 16 MByte (RAM), stat. 128 MByte (flash): data buffer at block transfer of measurements
- Connection of additional racks to the Test Controller: up to 3 slimline racks without Test Controller can be connected to a slimline EC system with embedded controller | | | Datasheet | | | Inputs | | Analog - DC | | Current | | Thermocouple | | | | Models: Q raxx A101, Q raxx A101-8SL, Q raxx A102, Q raxx A103, Q raxx A104, Q raxx A104-16SL... | | | |  | | | Features of the System:
- High density and flexibility: up to 16 plug-in modules in one system in any constellation, flexible plug selection
- Test Controller inclusive: Ethernet TCP/IP for configuration and data transfer, 16 MByte data memory, expandable by USB device, logging features, PAC functionality, IRIG synchronization
- Robust and reliable: stable and compact aluminum housing, easy to carry. Electromagnetic compatibility according EN 61000-4 and EN 55011. Temperature range -20 up to +60°C. Power supply 10 up to 30 VDC
Features of the Plug-in A108:
- 8 galvanic isolated input channels: differential voltage, current via shunt connector. Isolation voltage 100 VDC
- High accuracy digitalization: 24 bit ADC, 10 kHz sample rate per channel with 8 active channels, sum sample rate 80 kHz
- 2 digital in and 2 outputs
input: state, tare, memory reset
output: state, alarm, threshold
- Signal conditioning: linearization, digital filter, average, scaling, min/max storage, RMS, arithmetic, alarm
- Galvanic isolation: channel to channel to power supply and to interface, Viso 500 VDC | | | | Models: Q raxx A101, Q raxx A101-8SL, Q raxx A102, Q raxx A103, Q raxx A104, Q raxx A104-16SL... | | | | | | | | Most important features:
16 galvanic isolated input channels
differential voltage, current via shunt connector;
Isolation voltage 500 VDC
Fast and high accuracy digitalization
24 bit ADC, 10 kHz sample rate per channel
Signal conditioning
linearization, digital filter, average, scaling,
min/max storage, RMS, arithmetic, alarm
Galvanic isolation
channel to channel to power supply and to interface,
Viso 500 VDC
Electromagnetic Compatibility
according EN 61000-4 and EN 55011
Power supply 10…30 VDC
Accuracy class 0,01
With embedded Test Controller (version EC):
Optional fieldbus interface EtherCAT
EtherCAT according specification ETG,
256 read and 256 write variable with 10 kHz
Ethernet interface for configuration and data output
FTP, TCP/IP, UDP
FTP Server and FTP Client functionality
configurable function
High data rate over Ethernet
16 real variables with 10 kHz (block transfer)
64 real variables with 300 Hz (online
Data buffer memory dyn. 16 MByte (RAM), stat. 128 MByte (flash)
data buffer at block transfer of measurements
Connection of additional racks to the Test Controller
up to 3 slimline racks without Test Controller can be connected to a
slimline EC system with embedded controller
| | | | Models: Q raxx A101, Q raxx A101-8SL, Q raxx A102, Q raxx A103, Q raxx A104, Q raxx A104-16SL... | | | |  | | | Features of the System:
- High density and flexibility: up to 16 plug-in modules in one system in any constellation, flexible plug selection
- Test Controller inclusive: Ethernet TCP/IP for configuration and data transfer, 16 MByte data memory, expandable by USB device, logging features, PAC functionality, IRIG synchronization
- Robust and reliable: stable and compact aluminum housing, easy to carry. Electromagnetic compatibility according EN 61000-4 and EN 55011. Temperature range -20 up to +60°C. Power supply 10 up to 30 VDC
Features of the Plug-in A109:
- 4 galvanic isolated analog output channels: voltage ±10 V, current 0…20 mA selectable, isolation voltage 500 VDC
- DAC-resolution 16 bit: 100 kHz with 1 channel, 10 kHz with 4 channels
- 4 digital inputs and 4 digital outputs: configurable as 2 counter, 2 frequency, or 2 PWM inputs, 2 frequency or PWM output, state in or output
- Frequency in and outputs: frequency measurement up to 1 MHz (Chronos), frequency output up to 1 kHz
- Counter: For/backward counter, quadrature counter with reference zero, recognition (reset/enable), up to 1 MHz
- PWM in and output: measurement of duty cycle and frequency | | | | Models: Q raxx A101, Q raxx A101-8SL, Q raxx A102, Q raxx A103, Q raxx A104, Q raxx A104-16SL... | | | | | | | | Features of the System:
- High density and flexibility: up to 16 plug-in modules in one system in any constellation, flexible plug selection
- Test Controller inclusive: Ethernet TCP/IP for configuration and data transfer, 16 MByte data memory, expandable by USB device, logging features, PAC functionality, IRIG synchronization
- Robust and reliable: stable and compact aluminum housing, easy to carry. Electromagnetic compatibility according EN 61000-4 and EN 55011. Temperature range -20 up to +60°C. Power supply 10 up to 30 VDC
Features of the Plug-in A123:
- 4 high galvanic isolated input channels: differential voltage, current via shunt connector, isolation voltage 1200 VDC permanent
- 3 measuring ranges selectable each channel: ±10 V, ±1.25 V, ±100 mV
- Fast high accuracy digitalization: 24 bit ADC, 10 kHz sample rate per channel
- Signal conditioning: linearization, digital filter, average, scaling, min/max storage, arithmetic, alarm
- Galvanic isolation: channel to channel to power supply and to interface, isolation voltage 1200 VDC / 858 VACrms, test voltage 5 kVrms over 1 minute | | | | Models: Q raxx A101, Q raxx A101-8SL, Q raxx A102, Q raxx A103, Q raxx A104, Q raxx A104-16SL... | | | |  | | | Features of the System:
- High density and flexibility: up to 16 plug-in modules in one system in any constellation, flexible plug selection
- Test Controller inclusive: Ethernet TCP/IP for configuration and data transfer, 16 MByte data memory, expandable by USB device, logging features, PAC functionality, IRIG synchronization
- Robust and reliable: stable and compact aluminum housing, easy to carry. Electromagnetic compatibility according EN 61000-4 and EN 55011. Temperature range -20 up to +60°C. Power supply 10 up to 30 VDC
Features of the Plug-in A124:
- 4 high galvanic isolated input channels: thermocouple on high voltage potential (not isolated), isolation voltage 1200 VDC permanent
- Cold junction compensation; each channel on board
- Dynamic linearization: optimized positioning of the interpolation points within
- High accuracy digitalization: 24 bit ADC, 1 kHz sample rate per channel
- Signal conditioning: digital filter, average, scaling, min/max storage, arithmetic, alarm
- Galvanic isolation: channel to channel to power supply and to interface. Isolation voltage 1200 VDC / 858 VACrms. Test voltage 5 kVrms over 1 minute | | | | Models: Q raxx A101, Q raxx A101-8SL, Q raxx A102, Q raxx A103, Q raxx A104, Q raxx A104-16SL... | | | |  | | | Features of the System:
- High density and flexibility: up to 16 plug-in modules in one system in any constellation, flexible plug selection
- Test Controller inclusive: Ethernet TCP/IP for configuration and data transfer,
16 MByte data memory, expandable by USB device, logging features, PAC functionality, IRIG synchronization
- Robust and reliable: stable and compact aluminum housing, easy to carry. Electromagnetic compatibility according EN 61000-4 and EN 55011. Temperature range -20 up to +60°C. Power supply 10 up to 30 VDC
Features of the Plug-in A128:
- 4 high galvanic isolated input channels: differential voltage, isolation voltage 1200 VDC permanent
- 4 measuring ranges selectable each channel: ±40 V; ±120 V, ±400 V, ±1200 V
- Fast high accuracy digitalization: 24 bit ADC, 50 kHz sample rate per channel with 4 active channels,100 kHz sample rate per channel with 2 active channels
- Signal conditioning: linearization, digital filter, average, scaling, min/max storage, RMS, arithmetic, alarm
- Galvanic isolation: channel to channel to power supply and to interface, isolation voltage 1200 VDC / 858 VACrms, test voltage 5 kVrms over 1 minute | | | | Models: Q raxx A101, Q raxx A101-8SL, Q raxx A102, Q raxx A103, Q raxx A104, Q raxx A104-16SL... | | | | | | | | Features:
- 12 digital inputs and 4 digital outputs: configurable as counter, frequency, PWM and time inputs, frequency or PWM output, state in or output
- State in and outputs: process- and host controlled
- Frequency in and outputs: frequency measurement up to 1 MHz (Chronos method), frequency output up to 10 kHz
- Counter: for/backward counter, quadrature counter with reference zero recognition (reset/enable), up to 1 MHz
- PWM in and outputs: measurement of duty cycle and frequency, output with variable frequency and/or duty cycle
- Time measurement
- Power supply 10…30 VDC
Features with the Embedded Test Controller (version EC):
- Optional fieldbus interface EtherCAT: EtherCAT according specification ETG, 256 read and 256 write variable with 10 kHz
- Ethernet interface for configuration and data output: FTP, TCP/IP, UDP
- FTP Server and FTP Client functionality: configurable function
- High data rate over Ethernet:
16 real variables with 10 kHz (block transfer)
64 real variables with 300 Hz (online
- Data buffer memory dyn. 16 MByte (RAM), stat. 128 MByte (flash): data buffer at block transfer of measurements
- Connection of additional racks to the Test Controller: up to 3 slimline racks without Test Controller can be connected to a slimline EC system with embedded controller | | | | Models: Q raxx D101, Q raxx D101-16SL, Q raxx D104, Q raxx D105 | | | |  | | | Features:
- Q.raxx base unit: consists of 19” rack, Test Controller Q.gate and power supply unit, ready for 13 measurement plug-ins
- Flexibility at high density: up to 13 modules in one system with a individual compilation, various input plugs available
- Robust and reliable: Standard 19“ housing, 3 units, electromagnetic compatibility according EN 61000-4 and EN 55011. Temperature range -20 up to +60°C. Power supply 10 up to 30 VDC
- Synchronization and time stamp of measurement values: IRIG based master slave principle on RS485 standard. DCF77, AFNOR etc, GPS time and position data. SNTP over Ethernet
- Ethernet interface for configuration and data output: FTP, TCP/IP, UDP
- FTP Server and FTP Client functionality: configurable function
- High data rate over Ethernet:
128 real variables with 1 kHz (block transfer)
16 real variables with 10 kHz (block transfer)
64 real variables with 300 Hz (online)
- Data buffer memory 16 MByte: Data buffer at block transfer of measurements, different logger possibilities, extendable by USB device
- PAC functionality: Sequences, data logger, PID-controller, transfer functions, mathematic, numeric, Boolean combinations, functions generator
Plug-In Capabilities:
- 54 Multi Purpose
- 104 Thermocouples
- 104 Dyanmic Voltages | | | | Models: Q raxx Base Unit | | | |  | | | Features of the System:
- High density and flexibility: up to 16 plug-in modules in one system in any constellation, flexible plug selection
- Test Controller inclusive: Ethernet TCP/IP for configuration and data transfer,
16 MByte data memory, expandable by USB device, logging features, PAC functionality, IRIG synchronization
- Robust and reliable: stable and compact aluminum housing, easy to carry. Electromagnetic compatibility according EN 61000-4 and EN 55011. Temperature range -20 up to +60°C. Power supply 10 up to 30 VDC
Features of the Plug-in D101:
- 8 digital inputs and 8 digital outputs: configurable as counter, frequency, PWM and time inputs, frequency or PWM output, state in or output
- State in and outputs: process- and host controlled
- Frequency in and outputs, time measurement: frequency measurement up to 1 MHz (Chronos method), frequency output up to 10 kHz
- Counter: for/backward counter, quadrature counter with reference zero recognition (reset/enable), up to 1 MHz
- PWM in and outputs: measurement of duty cycle and frequency, output with variable frequency and/or duty cycle | | | | Models: Q raxx D101, Q raxx D101-16SL, Q raxx D104, Q raxx D105 | | | |  | | | Features of the System:
- High density and flexibility: up to 16 plug-in modules in one system in any constellation, flexible plug selection
- Test Controller inclusive: Ethernet TCP/IP for configuration and data transfer, 16 MByte data memory, expandable by USB device, logging features, PAC functionality, IRIG synchronization
- Robust and reliable: stable and compact aluminum housing, easy to carry. Electromagnetic compatibility according EN 61000-4 and EN 55011. Temperature range -20 up to +60°C. Power supply 10 up to 30 VDC.
Features of the Plug-in D104:
- 16 digital inputs: state, single or bit set, host controlled
- Configurable threshold: TTL or high level (EN61131-2, Type1)
- Short reaction time: 10 μs per input
- Galvanic isolation: I/O-signals (2 groups x 8 inputs), to power supply and to interface. Isolation voltage 500 VDC | | | | Models: Q raxx D101, Q raxx D101-16SL, Q raxx D104, Q raxx D105 | | | |  | | | Features of the System:
- High density and flexibility: up to 16 plug-in modules in one system in any constellation, flexible plug selection
- Test Controller inclusive: Ethernet TCP/IP for configuration and data transfer, 16 MByte data memory, expandable by USB device, logging features, PAC functionality, IRIG synchronization
- Robust and reliable: stable and compact aluminum housing, easy to carry. Electromagnetic compatibility according EN 61000-4 and EN 55011. Temperature range -20 up to +60°C. Power supply 10 up to 30 VDC
Features of the Plug-in D105:
- 16 digital outputs: state, single or bit set, host controlled
- High possible load: 30 VDC / 500 mA short circuit proof
- Short reaction time: 10 μs up to 1 ms per input
- Galvanic isolation: I/O-signals (2 groups x 8 inputs), to power supply and to interface. Isolation voltage 500 VDC | | | | Models: Q raxx D101, Q raxx D101-16SL, Q raxx D104, Q raxx D105 | | | |  | | | | | | Models: SWT, SWTD, T401, T402, T411, T412... | | | | | | | | | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| © 2008 A-Tech Instruments Ltd. |
|
|
|
|
|
|
|
|
