8661, Contactless Rotary Torque Sensor
- Low linearity error from less than 0.05 % f.s
- Contactless
- Smart status indicator
- Output signal 0…+/- 10V
- USB output and software DigiVision (option)
- Integrated Angle Measurement (option)
- Integrated speed Measurement (option)
- Keyways (option)
- Very good Value-for-money ratio
Type | Rotary |
Dual Range | |
Dual Range | 1:4 |
1:5 | |
1:10 | |
Full Scale | 0.05 Nm |
0.1 Nm | |
0.2 Nm | |
0.5 Nm | |
1 Nm | |
2 Nm | |
5 Nm | |
10 Nm | |
20 Nm | |
50 Nm | |
100 Nm | |
200 Nm | |
500 Nm | |
1000 Nm | |
Max Speed | 7000 RPM |
15000 RPM | |
25000 RPM | |
Output | ±10 V DC |
USB | |
Precision | ±0.25 % FS |
±0.30 % FS | |
Excitation | 10 V - 30 V DC |
Drive Side | Round Shaft |
Test Side | Round Shaft |
IP Rating | IP40 |
Min Temperature | 0 °C |
Max Temperature | 60 °C |
This sensor is perfect for industrial production and assembly applications where there is a need to measure actuating or breakaway torques, holding torques or tightening torques.
Its high measurement quality means that the sensor is equally suited to quality control applications and laboratory-based research and development projects.
For network-independent, mobile use, the torque sensor offers an optional USB interface. This can be connected to a notebook running the PC software supplied with this device to take on-site measurements with accompanying visualization and archival of measurement values.
The applied torque can be read easily by evaluation units or controllers connected to the normalized analog interface.
Its compact, robust and vibration-proof construction makes it suitable for use in the following example applications:
- Test setups for precision mechanics
- Measurements on micromechanical actuator elements
- Engine test benches including measurement of mechanical power
- Recording biomechanical movements in medical engineering
- Precision frictional torque movements on bearings
- Use as test-bench measuring device
8661-4020 | +/-0.02 Nm, (0.177in-lb.); Shaft O.D. 5g6 |
8661-4050 | +/-0.05 Nm, (0.4425in-lb.); Shaft O.D. 5g6 mm |
8661-4100 | +/-0.1 Nm, (0.885in-lb.); Shaft O.D. 5g6 mm |
8661-4200 | +/-0.2 Nm, (1.77in-lb.); Shaft O.D. 5g6 mm |
8661-4500 | +/-0.5 Nm, (4.425in-lb.); Shaft O.D. 5g6 mm |
8661-5001 | +/-1 Nm, (8.85in-lb.); Shaft O.D. 5g6 mm |
8661-5002 | +/-2 Nm, (17.7in-lb.); Shaft O.D. 6g6 mm |
8661-5005 | +/-5 Nm, (44.25in-lb.); Shaft O.D. 15g6 mm |
8661-5010 | +/-10 Nm, (88.5in-lb.); Shaft O.D. 15g6 mm |
8661-5020 | +/-20 Nm, (177in-lb.); Shaft O.D. 15g6 mm |
8661-5050 | +/-50 Nm, (442.5in-lb.); Shaft O.D. 26g6 mm |
8661-5100 | +/-100 Nm, (885in-lb.); Shaft O.D. 26g6 mm |
8661-5200 | +/-200 Nm, (1770in-lb.); Shaft O.D. 26g6 mm |
8661-5500 | +/-500 Nm, (4425in-lb.); Shaft O.D. 45g6 mm |
8661-6001 | +/-1000 Nm, (8850in-lb.); Shaft O.D. 45g6 mm |
8661 Contactless Rotary Datasheet |
Metal Bellows Coupling (8690) Datasheet |
Precision Torque Monitoring with 9307 and 8661 Brochure |
8661-4050-v0x00 STP Drawings |
8661-4050-v0x00 CAD Drawing Drawings |
8661-4100-v0x00 CAD Drawing Drawings |
8661-4200-v0x00 CAD Drawing Drawings |
8661-4500-vxx00 CAD Drawing Drawings |
8661-5001-vxx00 CAD Drawing Drawings |
8661-5002-vxx00 CAD Drawing Drawings |
8661-5005-vxx00 CAD Drawing Drawings |
8661-5010-vxx00 CAD Drawing Drawings |
8661-5020-vxx00 CAD Drawing Drawings |
8661-5050-vxx00 CAD Drawing Drawings |
8661-5100-vxx00 CAD Drawing Drawings |
8661-5200-vxx00 CAD Drawing Drawings |
8661-5500-vxx02 CAD Drawing Drawings |
8661-6001-vxx02 CAD Drawing Drawings |
- Contactless Rotary Torque Sensor
- Dual Range
- Keyway Shafts
- Connection: 12-pin Series 581 Connector with Speed Option
- Analog Output ±5V (±10V Option)
Type | Rotary, Dual Range |
Dual Range | 1:10 |
Full Scale | 0.5 Nm, 1 Nm, 2 Nm, 3 Nm, 5 Nm, 10 Nm, 20 Nm, 30 Nm, 50 Nm, 100 Nm, 200 Nm, 300 Nm, 500 Nm, 1000 Nm, 2000 Nm, 5000 Nm, 10000 Nm, 20000 Nm |
Max Speed | 5000 RPM, 5500 RPM, 7000 RPM, 10000 RPM, 12000 RPM, 15000 RPM |
Output | ±5 V DC, ±10 V DC, Speed/Angle (TTL) |
Precision | ±0.10 % FS |
- Contactless Rotary Torque Sensor
- Dual Range
- Round Shafts
- Connection: 12-pin Series 581 Connector with Speed Option
- Foot Mounted
- Analog Output ±5V (±10V Option)
Type | Rotary, Dual Range |
Dual Range | 1:10 |
Full Scale | 5 Nm, 10 Nm, 20 Nm, 30 Nm, 50 Nm, 100 Nm, 200 Nm, 300 Nm, 500 Nm, 1000 Nm, 2000 Nm, 5000 Nm, 10000 Nm, 20000 Nm |
Max Speed | 3500 RPM, 5500 RPM, 7000 RPM, 12000 RPM |
Output | ±5 V DC, ±10 V DC, Speed/Angle (TTL) |
Precision | ±0.10 % FS |