DSCA42, Transmitter Interface Analog Signal Conditioner DIN Rail Module
The DSCA42 transmitter interface module provides a single channel of 4-20mA process current input which is filtered, isolated, amplified and converted to a high-level voltage output.
Features:
- 2-Wire Transmitter Interface Module with Loop Power
- 1500 V Transformer Isolation
- True 3-Way Isolation
- Accuracy: ± 0.03%
- DIN Rail Mounted Module
- ANSI/IEEE C37.90.1 Transient Protection
- Input Protected to 240 V AC Continuous
Manufacturer: Dataforth
Quote
Datasheet
Specifications
Models & Accessories
Downloads
Similar Products
DSCA42 - Specifications
| Input Type | 4 - 20 mA |
| # of Inputs | 1 |
| Output Type | 0 - 10 V DC |
| 2 - 10 V DC | |
| Max Bandwidth | 100 Hz |
| Excitation | 20 V DC |
| Isolation | Yes |
| Supply Power | 19 - 29 V DC |
DSCA42 - Models & Accessories
Models
| DSCA42-01 | 4-20 mA Input, 0-10 V Output |
| DSCA42-02 | 4-20 mA Input, 2-10 V Output |
| DSCA42-03 | 4-20 mA Input, 4-20 mA Output |
| DSCA42-04 | 4-20 mA Input, 0-20 mA Output |
DSCA42 - Downloads
DSCA42 V2 Datasheet |
DSCA42 Datasheet |
DSCA Series Datasheet |
DSCA Dimensions Drawings |
DSCA Calibration Procedure App Note |
AN101 RMS_Voltage_Current App Note |
AN105 Resistance Temperature Detector V2 App Note |
AN121 RiseTime vs BW App Note |
AN126 Tuning_Surge_Tank_Level_Control_Loops App Note |
AN128 RMS Revisited App Note |
AN129 Harmonics and utility costs App Note |
AN801 DSCA Calibration Procedure App Note |
Hysteresis Specifications Tech Note |
Faraday's Law of Induction Tech Note |
Data Acquisition Systems Accessories Tech Note |
Signal Conditioner Surge Withstand Capability Tech Note |
Signal-to-Noise Ratio, SNR Tech Note |
Signal Conditioning Measured vs Combinational Error Tech Note |
When Good Grounds Go Bad Tech Note |
Sample Test Report Tech Note |
Why Isolation (White Paper) Tech Note |
Why Should Sensors Be Isolated Tech Note |
DSCA42 - Similar Products
- Current Input Module
- 1500 V Transformer Isolation
- True 3-Way Isolation
- Accuracy: ± 0.03%
- DIN Rail Mounted Module
- ANSI/IEEE C37.90.1 Transient Protection
- Input Protected to 240 V AC Continuous
| Input Type | 0 - 20 mA, 4 - 20 mA, ±20 mA |
| # of Inputs | 1 |
| Output Type | 0 - 10 V DC, ±10 V DC, 0 - 20 mA, 4 - 20 mA |
| Max Bandwidth | 100 Hz |
| Isolation | Yes |
| Supply Power | 15 - 30 V DC |
- Process Monitor, for process signals
- Extremely fast digital transducer
- Isolated Versions Available
- USB Connectivity for easy calibration
- DAQ Mode with a measuring rate - up to 7500 measurements per second
- 2 Button teach-in for Potentiometer
- Teach-in, allows easy setting of both min. and max. of the measuring range
- Output: 4…20 mA/0…10 V
| Interface | USB |
| Input Type | 0 - 10 V DC, 0 - 20 mA, 4 - 20 mA |
| # of Inputs | 1 |
| Output Type | 0 - 10 V DC, 4 - 20 mA, RS-485 |
| Excitation | 15 V DC, 24 V DC |
| Isolation | Yes |
- Programmable Isolated Transmitters
- DC Voltmeter and ammeter
- Teach- In, Digital Filter, Tare
- Output: 0/4...20 mA/0...5 mA/0...2/5/10 V/10V
- Power Supply 10...30 V AC/DC
- Option: Comparators, Data Output, USB Interface
- Isolated
- Accuracy: ±0,15 % of range (for 20 meas./s)
| Interface | USB |
| Input Type | ±25 V DC, ±50 V DC, ±100 V DC, ±200 V DC, ±400 V DC, ±1 A, ±5 A |
| # of Inputs | 1 |
| Output Type | 0 - 2 V DC, 0 - 5 V DC, 0 - 10 V DC, ±10 V DC, 0 - 5 mA, 0 - 20 mA, 4 - 20 mA, RS-485 |
| Isolation | Yes |
| Supply Power | 10 - 30 V DC, 10 - 30 V AC |
- DC Voltmeter and Ammeter
- Transmitters have galvanic separation with isolation voltage of 600 V
- By trimmers accessible from the face of the transmitter we may adjust the range of output signal within the range of ±10%
- Accuracy: ±0,1 % of range
- 35 mm wide DIN Rail Mount
- Rating: IP 20
| Input Type | 0 - 450 V DC, 0 - 5 A |
| # of Inputs | 1 |
| Output Type | 0 - 2 V DC, 0 - 5 V DC, 0 - 10 V DC, ±10 V DC, 0 - 20 mA, 4 - 20 mA, ±20 mA |
| Excitation | 5 - 24 V DC |
| Isolation | Yes |
| Supply Power | 10 - 30 V DC, 10 - 30 V AC, 80 - 250 V AC |
- Process Monitor
- Transmitters have galvanic separation with isolation voltage of 600 V
- By trimmers accessible from the face of the transmitter we may adjust the range of output signal within the range of ±10%
- Accuracy: ±0,1 % of range
- 35 mm wide DIN Rail Mount
- Rating: IP 20
| Input Type | 0 - 2 V DC, 0 - 5 V DC, 0 - 10 V DC, 0 - 5 mA, 0 - 20 mA, 4 - 20 mA |
| # of Inputs | 1 |
| Output Type | 0 - 2 V DC, 0 - 5 V DC, 0 - 10 V DC, ±10 V DC, 0 - 20 mA, 4 - 20 mA, ±20 mA |
| Excitation | 5 - 24 V DC |
| Isolation | Yes |
| Supply Power | 10 - 30 V DC, 10 - 30 V AC, 80 - 250 V AC |