3045A, Cryogenic LIVM Accelerometer
- 5 mV/g sensitivity
- 1,000g range
- 4.8 to 1,800 Hz frequency range (±5%)
- 10-32 axial connector
- 1/4-28 stud mount
- -320°F (-196°C) operation
- Cryogenic
- Two-pole low pass filter
- Stable Mosfet amplifier technology
- Case isolated
- IEPE (2 to 4 mA, +28 VDC)
- Linearity; 1.0% - best fit between any two points used for calibration
- Max. vibration: 1000 G
- Max. shock: 2000 G
- Weight: 20 grams
- Stainless steel
- Hermetic Seal
The Dytran model 3045A is an IEPE accelerometer with continuous operation to -320°F (-196°C), expressly designed to support cryogenic vibration testing requirements.
Offered with a 5 mV/g sensitivity, the design of model 3045A incorporates a two-pole low-pass filter, which aids in eliminating spurious high frequency data, and a rugged stainless steel construction, along with a 1/4-28 integral mounting stud and a 10-32 axial connector. Even at extreme temperatures, the model 3045A displays an extremely stable and continuous signal output. Units are hermetically sealed for reliable operation in high humidity and dirty environments. The accelerometer is also electrically isolated via use of an internal Faraday shield for noise immunity.
Recommended Accessories: model 4110C current source power unit
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 1000 g |
| Output | 5 mV/g |
| Excitation | 28 V DC |
| Material | Stainless Steel |
| Mounting | Integral Stud |
| Connection | 10-32 Micro Coaxial |
| Min Temperature | -196 °C |
| Max Temperature | 149 °C |
3045A, Accelerometer Datasheet |
- IEPE
- Lightweight
- High natural frequency of >90 kHz
- 0.05 mV/g, 0.1 mV/g, 0.25 mV/g, 0.5 mV/g, 1 mV/g or 2 mV/g sensitivity
- 2,500g, 5,000g, 10,000g. 20,000 50,000g or 70,000g range
- 0.35 to 10,000 Hz frequency range (±10%)
- 10-32 axial connector
- Integral mounting stud; 1/4-28 stud(3200B), M6 stud(3200BM) or 10-32 stud(3200BT)
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 2500 g, 5000 g, 10000 g, 20000 g, 50000 g, 70000 g |
| Output | 0.05 mV/g, 0.1 mV/g, 0.25 mV/g, 0.5 mV/g, 1 mV/g, 2 mV/g |
| Excitation | 18 - 30 V DC |
| Material | Stainless Steel |
- IEPE
- 5 mV/g, 10 mV/g, 20 mV/g, 50 mV/g, 100 mV/g, 200 mV/g or 500 mV/g
- 10g, 25g, 50g, 100g, 250g, 500g or 1000g
- 1 to 10,000 Hz frequency range (±5%)
- 10-32 axial connector
- 10-32 tapped hole
- Weight: 10 grams
- Titanium
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 10 g, 25 g, 50 g, 100 g, 250 g, 500 g, 1000 g |
| Output | 5 mV/g, 10 mV/g, 20 mV/g, 50 mV/g, 100 mV/g, 200 mV/g, 500 mV/g |
| Excitation | 18 - 30 V DC |
| Material | Titanium |
- IEPE
- IEEE 1451.4 TEDS
- Cost Effective
- 1 mV/g or 5 mV/g sensitivity
- 1,000g or 5,000g range
- 1 to 10,000 Hz frequency range (±10%)
- 10-32 axial connector
- 10-32 tapped hole
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 1000 g, 5000 g |
| Output | 1 mV/g, 5 mV/g |
| Excitation | 18 - 30 V DC |
| Material | Titanium |
- Low profile
- IEPE
- 5 or 10 mV/g sensitivity
- 500g or 1000g range
- 1 to 10,000 Hz (±10%)
- 18-inch integral cable
- Adhesive mount
- Weight: 1.5 grams
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 500 g, 1000 g |
| Output | 5 mV/g, 10 mV/g |
| Excitation | 20 - 32 V DC |
| Material | Titanium |
- IEPE
- 100 mV/g sensitivity
- 50g range
- 0.5 to 10,000 Hz (±5%)
- 5-44 radial connector
- 5-40 stud mount
- Weight: 2.5 grams
- Stainless Steel
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 50 g, 100 g, 500 g, 1000 g |
| Output | 5 mV/g, 10 mV/g, 50 mV/g, 100 mV/g |
| Excitation | 18 - 30 V DC |
| Material | Stainless Steel |