3003B, Low Bias Miniature Triaxial Accelerometer
- IEPE
- Triaxial
- High temperature
- Operates from +4.0 to +5.5 VDC
- +347°F (+175°C) operation
- 2 mV/g sensitivity
- 500g range
- 2 to 5,000 Hz frequency range (±10%)
- 22-inch integral cable
- Adhesive mount
- Weight: 6 Grams
- Titanium
- Epoxy Seal
The Dytran model 3003B is a high performance triaxial IEPE accelerometer capable of operating at temperatures up to +347°F (+175°C) and was designed for down-hole drill head vibration monitoring.
Sensors developed for down-hole vibration monitoring must be able to deliver accurate and reliable data, while simultaneously tolerating harsh conditions. Critical characteristics of these sensors include a miniature design, high temperature operation, and the ability to operate at low power levels. Dytran’s model 3003B is ideal for such applications, as it is packaged in a miniature titanium housing with a vertical height of just 0.365 inches, is capable of reliable operation at temperatures up to +347°F (+185°C), and was specially designed to operate from +4.0 to +5.5 VDC compliance voltage.
The Dytran model 3003B is offered with a sensitivity of 2 mV/g and 500g range, and is designed with adhesive mounting capabilities. Weighing just 6 grams, units utilize incorporate four permanently attached 22-inch long lead wires.
| Type | Voltage Mode (IEPE) |
| # of Axis | 3 |
| Full Scale | 500 g |
| Output | 2 mV/g |
| Excitation | 4.5 V DC |
| Material | Titanium |
| Mounting | Adhesive |
| Connection | 4-Wire Integral Cable |
| Min Temperature | -40 °C |
| Max Temperature | 175 °C |
3003B, High Temp Accelerometer can be used in the following applications:
- Mining
- Drill & Blast holes in Open Pit mining, Where the drill operator will drill several holes, then fill with explosives and detonate to lift rock allowing access to ore body RC Exploration
- Pit grade control
- GW- Geothermal Bore Holes
- Waterwells Oil
- Gas- Deepwell Bore Holes Construction
- Piling
- Footings
3003B, Triaxial Accelerometer Datasheet |
- IEPE
- Triaxial
- Lightweight
- Miniature
- +320°F (+160°C) operation (A2H,A6H)
- +325°F (+163°C) operation (AH,A3H,A4H))
- 1 mV/g, 5 mV/g, 10 mV/g sensitivity
- 500g, 1000g, 5000g range
| Type | Voltage Mode (IEPE) |
| # of Axis | 3 |
| Full Scale | 500 g, 1000 g, 5000 g |
| Output | 1 mV/g, 5 mV/g, 10 mV/g |
| Excitation | 18 - 30 V DC |
| Material | Titanium |
- Triaxial
- IEPE
- IEEE 1451.4 TEDS capabilities
- Miniature design
- Extended low frequency response
- Low noise JFET electronics
- 5 mV/g, 10 mV/g or 25 mV/g sensitivity
- 200g, 500g, or 1,000g range
| Type | Voltage Mode (IEPE) |
| # of Axis | 3 |
| Full Scale | 200 g, 500 g, 1000 g |
| Output | 5 mV/g, 10 mV/g, 25 mV/g |
| Excitation | 18 - 30 V DC |
| Material | Titanium |
- Triaxial
- IEPE
- IEEE 1451.4 TEDS capabilities
- Miniature design
- Extended low frequency response
- Low noise JFET electronics
- 1 mV/g, 10 mV/g, 50 mV/g or 100 mV/g sensitivity
- 50g, 100g, 500g or 5000g range
| Type | Voltage Mode (IEPE) |
| # of Axis | 3 |
| Full Scale | 50 g, 100 g, 500 g, 5000 g |
| Output | 1 mV/g, 10 mV/g, 50 mV/g, 100 mV/g |
| Excitation | 18 - 30 V DC |
| Material | Titanium |