5M70, DC Strain Gage Conditioner
The Model 5M70 DIN unit is a low cost, general-purpose single-channel conditioner for input of pressure, force, torque, weight, and other variables measured by conventional DC-excited strain gage transducers. The 5M70 delivers filtered analog...
Features:
- Remotely sensed excitation, user-selectable
- Chopper-stabilized low-drift amplification
- Configurable low-pass active filtering
- Shunt switch-based calibration
- Wide range Zero & Span adjustments
Manufacturer: Daytronic Corp.
Quote
Datasheet
Description
Specifications
Downloads
Similar Products
5M70 - Description
The Model 5M70 DIN unit is a low cost, general-purpose single-channel conditioner for input of pressure, force, torque, weight, and other variables measured by conventional DC-excited strain gage transducers. The 5M70 delivers filtered analog output of ±5 Vdc ±10 Vdc or 4-20 mA; switch selectable by the user. Advanced analog design directly addresses the problem of measurement inaccuracy in industrial environments of high electromechanical noise. Exceptional signal stability and accuracy over a remarkably wide range of sensor inputs .
5M70 - Specifications
| Input Type | Strain Gauge |
| # of Inputs | 1 |
| Output Type | ±5 V DC |
| ±10 V DC | |
| 4 - 20 mA | |
| Max Bandwidth | 5 kHz |
| Excitation | 2.5 V DC |
| 5 V DC | |
| Isolation | No |
| Supply Power | 12 - 28 V DC |
5M70 - Downloads
5M70, DC Strain Gage Conditioner Datasheet |
5M70 - Similar Products
- Strain Gauge & Potentiometer Input Amplifier
- 50 V Continuous Isolation
- Accuracy: ± 0.05%
- DIN Rail Mounted
- In-Line Amplifier (Option)
- Aluminum Housing
- Protection Class: IP40
| Input Type | 0 - 10 mV DC, 0 - 100 mV DC, 0 - 1 V DC, 0 - 10 V DC, ±10 V DC, Potentiometer, Strain Gauge |
| # of Inputs | 1 |
| Output Type | ±5 V DC, ±10 V DC, 0 - 20 mA, 4 - 20 mA |
| Max Bandwidth | 1 kHz, 4 kHz |
| Excitation | 2.5 V DC, 5 V DC, 10 V DC |
| Isolation | Yes |
- Universal Sensor Input Module
- Accuracy: < 0.03%
- DIN Rail Mounted Module
- Aluminum Housing
- Protection Class: IP20 (IP65 Option)
| Interface | RS-232 |
| Input Type | ±10 V DC, Potentiometer, Strain Gauge |
| # of Inputs | 1 |
| Output Type | Profibus |
| Max Bandwidth | 2 kHz |
| Excitation | 2.5 V DC, 5 V DC, 10 V DC |
- High Accuracy
- For Switch Cabinet Assembly, Width 23 mm, only
- Direct Connection to PLC
- Long Input Lead from GM 40 to Evaluation possible
- Easy to operate
- Voltage or Current Output
- DIN Rail Mount
- Rating: IP20
| Input Type | Strain Gauge |
| # of Inputs | 1 |
| Output Type | ±5 V DC, ±10 V DC, 4 - 20 mA |
| Max Bandwidth | 1 kHz, 5 kHz, 10 kHz |
| Excitation | 5 V DC, 10 V DC |
| Isolation | Yes |
- DIN rail mounting Amplifier, Strain Gauge Transducer Amplifier
- Compatible with most full bridge strain gauge transducers
- Provide variable excitation and signal amplification
- Screw terminal connections
- Simple controls for gain and zero adjustment
- Input zero switch
- Continuous variation of excitation
- Input/output isolation
| Input Type | Strain Gauge |
| # of Inputs | 1 |
| Output Type | 0 - 10 V DC, ±10 V DC, 4 - 20 mA |
| Max Bandwidth | 5 kHz |
| Isolation | Yes |
| Supply Power | 9 - 36 V DC |
- Regulated, remotely sensed AC excitation
- Precise symmetry and signal phase adjustment
- Standard DIN Package
- Selectable low-pass active filtering
- Wide range zero and span controls
- Internal shunt resistor provided
| Input Type | Strain Gauge |
| # of Inputs | 1 |
| Output Type | ±5 V DC, ±10 V DC, 4 - 20 mA |
| Max Bandwidth | 650 Hz |
| Excitation | 2.77 V AC |
| Isolation | No |