KST94C-9N, Pneumatic Actuated Accelerometer / Probe
- Suited for automated vibration measurement
- Pneumatic Actuated, tip guided & air damped piston / cylinder system
- Linear frequency range by frictionless movement of the sensing element
- Constant tip pressure by spring suspension guarantees reproducible measuring results
- Low distortion and Low sensitivity for environmental vibration
- Long life expectancy: over 10 million test cycles
- IP62 protection grade, oil resistant
- IEPE voltage output
- Probe tip electrically isolated from body
The KST94C-9N, mainly used for automated vibration testing in mass production processes. Features a movable tip, can be approximated to the test object. A sophisticated damping system provides excellent reproducibility and suppression of environmental vibration. This model has an outstanding life expectancy of over 10 million test cycles.
Type | Voltage Mode (IEPE) |
# of Axis | 1 |
Full Scale | 40 g |
Output | 100 mV/g |
Material | Stainless Steel |
Mounting | Screw |
Connection | 10-32 Micro Coaxial |
Max Temperature | 80 °C |
Suited for automated vibration measurement, for instance in quality control.
KST94C-9N Datasheet Datasheet |
- Suited for automated vibration measurement
- Movable tip guided by air damped piston / cylinder system
- Linear frequency range by frictionless movement of the sensing element
- Constant tip pressure by spring suspension guarantees reproducible measuring results
- Low distortion
- Low sensitivity for environmental vibration
- Long life expectancy: over 10 million test cycles
- IP62 protection grade, oil resistant
Type | Voltage Mode (IEPE) |
# of Axis | 1 |
Full Scale | 20 g |
Output | 100 mV/g |
Material | Stainless Steel |
Mounting | Screw |
- IEPE output: precision accelerometer with shear ceramics
- Sensitivity: 10mV/g to 100mV/g
- Well suited for Modal and Structural Analysis
- Maximum 8000 g
- Frequency Response: 0.2Hz to 16kHz, -3db
- Operating Temperature: -20 to 120 deg.C
- Clip Mounting in 3 directions
- TEDS
Type | Voltage Mode (IEPE) |
# of Axis | 1 |
Full Scale | 50 g, 500 g |
Output | 10 mV/g, 100 mV/g |
Material | Stainless Steel |
Connection | 10-32 Micro Coaxial |
- IEPE output: precision accelerometer with shear ceramics
- Sensitivity: 10mV/g to 100mV/g
- Well suited for Modal and Structural Analysis
- Frequency Response: 0.2Hz to 46kHz, -3db
- Operating Temperature: -20 to 120 deg.C
- Easy mounting by cubic case with M3 thread
- Versions with vertical and horizontal output
- TEDS
Type | Voltage Mode (IEPE) |
# of Axis | 1 |
Full Scale | 50 g, 500 g |
Output | 10 mV/g, 100 mV/g |
Material | Stainless Steel, Aluminum |
Mounting | Adhesive |
- IEPE output
- Compact design, round housing
- For adhesive, clamp or tube mounting
- UNF 10-32 socket (Microdot) Connector
Type | Voltage Mode (IEPE) |
# of Axis | 1 |
Full Scale | 50 g, 500 g |
Output | 10 mV/g, 100 mV/g |
Material | Stainless Steel |
Mounting | Adhesive |
- Low noise JFET electronics
- Unique cubic design
- IEPE
- 10 mV/g, 100 mV/g or 500 mV/g sensitivity
- 10g, 50g or 500g range
- 1 to 10,000 Hz frequency range (±5%)
- 10-32 radial connector
- 10-32 tapped hole
Type | Voltage Mode (IEPE) |
# of Axis | 1 |
Full Scale | 10 g, 50 g, 500 g |
Output | 10 mV/g, 100 mV/g, 500 mV/g |
Excitation | 18 - 30 V DC |
Material | Titanium |