SI-ETH, 1-2 Chn Ethernet Data Acquisition Module
- Up to 16 bit resolution
- Input Types for mV, V and mA, inter-mixed
- Synchronism of both measuring channels
- Trigger control via software
- Voltage supply via PoE or separate 110Vac adapter
SI-ETH-Ethernet DAS Module Selection Chart
| Unit Type | Standalone |
| Input Type | Voltage |
| Current | |
| Strain Gauge | |
| Analog Inputs | 2 |
| Max Bandwidth | 1 kHz |
| Max Sample Rate | 2 kHz |
| Resolution | 16-bit |
| Communication | Ethernet |
| Min Temperature | -10 °C |
| Max Temperature | 50 °C |
| IP Rating | IP40 |
Typical Applications
- Mobile test measurements using a laptop
- Experimental setups in test laboratories
- Secondary measurements of control devices
- PC-based recordings of strain characteristics
- measurements in chemical & biotechnology industries
Many standard sensors, such as force-, torque-, displacement- and pressure sensors, linear potentiometers, and Process Signals etc., can be used with the SI-ETH.
The voltage supply of the SI-USB3 is provided by PoE, an external 110Vac adapter, or by a 12 to 30 Vdc Power Supply. The connected sensors are directly supplied with voltage through the measuring amplifier which eliminates the need for separate sensor supply voltage. The low-pass filter second order allows filtration of unwanted frequencies.
The connection to LabVIEW or integration into own programs is possible with the available driver package.
The following Sensor output signals can be digitally converted and conveniently displayed and evaluated via the free evaluation software:
- Load, Torque, Strain or Pressure Input range ±3 mV/V (Excitation 4V ≤20 mA)
- Process Signal or Sensor Input range ±5V/±10V (Sensor supply 12V ≤80 mA)
- Process Transmitter or Sensor Input range 0/4 ... 20 mA (Sensor supply 12V ≤80 mA)
- Linear or Rotary Potentiometer Input range 0 ... 5V (Sensor supply 5V ≤170 mA)
| SI-ETH/DMS/DMS | 2 chns Strain Gauge Sensor Input Module, +/-3mV/V, 5 Vdc Exc |
| SI-ETH/4.5 mV/V/4.5 mV/V | 2 chn Strain Gauge Sensor Input Module, +/-4.5mV/V, 5 Vdc Exc. |
| SI-ETH/U5/U5 | 2 Chn 5 Vdc Input Module, 12 Vdc Exc. |
| SI-ETH/U10/U10 | 2 Chn 10 Vdc Input Module, 12 Vdc Exc. |
| SI-ETH/I20/I20 | 2 Chn 0/4 to 20 mA input module , 12 Vdc Exc. |
| SI-ETH/DMS/U5 | Strain Gauge & 5Vdc Sensor Input Module, +/-3mV/V & 5Vdc, 5 Vdc Exc. |
SI-ETH-Ethernet Data Acquisition Module Datasheet |