AMP330, In-Line Strain Gauge Input Signal Conditioner & Amplifier
The AMP330 is a highly accurate precision amplifier that performs the amplification of the sensor signal being applied. Current and voltage outputs are available simultaneously. The 10Vdc sensor excitation is performed by the amplifier module itself.
Features:
- Accuracy: ± 0.01%
- In-Line Amplifier
- Aluminum Housing
- Protection Class: IP31
Manufacturer: EFE Sensors
Quote
Datasheet
Specifications
Applications
Downloads
Related Products
Similar Products
AMP330 - Specifications
| Input Type | Strain Gauge |
| # of Inputs | 1 |
| Output Type | 0 - 10 V DC |
| 4 - 20 mA | |
| Max Bandwidth | 1 kHz |
| 10 kHz |
AMP330 - Applications
The amplifier module AMP330 is used wherever measurement signals from strain gauges based sensors have to be converted into standard signals. The convenient mounting In-Line with the sensor Cable, providing amplification, closer to the Sensor location, reducing noise and improving accuracy.
AMP330 - Downloads
AMP330 In-Line Strain Gage Signal Conditioner ATI Datasheet |
AMP330 - Related Products
- Accuracy: ± 0.01%
- DIN Rail Mounted
- Protection Class: IP31
- Thermal Shift : 25 ppm of F.S.
| Input Type | ±10 mV DC, ±30 mV DC, ±50 mV DC, ±100 mV DC |
| # of Inputs | 1 |
| Output Type | ±10 V DC, 4 - 20 mA |
| Max Bandwidth | 1 kHz, 10 kHz |
| Excitation | 5 V DC, 10 V DC |
| Supply Power | 14 - 26 V DC |
AMP330 - Similar Products
- Input Ranges, 2.2 - 44 mV
- Excitation, 5 or 10 Vdc selectable
- High Accuracy
- Voltage or Current Output
- Direct Connection to PLC
- Long Input Lead from SI to Evaluation possible
- Applicable in heavy Industries by robust Aluminum Casting Housing
- High Level of Protection IP66
| Input Type | Strain Gauge |
| # of Inputs | 1 |
| Output Type | ±5 V DC, ±10 V DC, 0 - 20 mA, 4 - 20 mA |
| Max Bandwidth | 1 kHz, 5 kHz, 10 kHz |
| Excitation | 5 V DC, 10 V DC |
| Isolation | No |
- High Accuracy
- Direct Connection to PLC
- Long Input Lead Possibility from LCV to Evaluation
- Voltage or Current Output
- Integrable in large Sensors as Board
- High Level of Protection IP67
- Tube housing; IP67
- Linearity; 0.02% F.S.
| Input Type | Strain Gauge |
| # of Inputs | 1 |
| Output Type | ±5 V DC, ±10 V DC, 0 - 20 mA, 4 - 20 mA |
| Max Bandwidth | 1 kHz |
| Excitation | 5 V DC |
| Isolation | No |
- In-line Amplifier
- Compatible with Most full bridge strain gauge transducers
- Provides variable excitation and signal amplification
- Accepts both uni-polar or bi-polar input signals
- Simple controls for gain and zero adjustment
- Voltage / 4-20mA output
- IP 65 Rating
- Aluminum Housing
| Input Type | Strain Gauge |
| # of Inputs | 1 |
| Output Type | ±3 to ±10 V DC, 4 - 20 mA |
| Max Bandwidth | 5 kHz |
| Excitation | 3 - 10 V DC |
| Isolation | No |
- In-line Amplifier
- Compatible with Most full bridge strain gauge transducers
- Screw terminal connections
- Simple controls for gain and zero adjustment
- Input zero and circuit test switch
- Signal overload indicator
- Synchronous demodulator
- Calibration: a "CAL" switch is included which connects a precision (59k) resistor across one arm of the bridge. The "SH.CAL" terminal may be used to operate this facility remotely via the internal relay
| Input Type | Strain Gauge |
| # of Inputs | 1 |
| Output Type | ±10 V DC, 4 - 20 mA |
| Max Bandwidth | 500 Hz |
| Excitation | 5 V AC |
| Isolation | No |
- Strain Gauge Input
- 50 V Continuous Isolation
- Accuracy: 0.10%
- Multi-Channel up to 4 Inputs
- Aluminum Housing
- Available as Open Circuit without Housing
- Simple configuration using DIP switch
- Protection Class: IP20 (IP67 Option)
| Input Type | Strain Gauge |
| # of Inputs | 1, 2, 3, 4 |
| Output Type | 0 - 5 V DC, 0 - 10 V DC, ±5 V DC, ±10 V DC |
| Max Bandwidth | 1 kHz |
| Excitation | 2.5 V DC |
| Isolation | No |