CD1110, TE Low Ranges Dynamic Torquemeter
- Range from ±0.05 to ±2 Nm (±0.04 to ±1.5 lbf.ft)
- Keyed Shaft couplings
- Integrated Mechanical Stops
- Aluminum shaft
- Cable Gland or Connector Output
- Over torque protection
- Integrated Mechanical Stops
- High Level Output Model with Integrated Amplifier
The CD1110 series is designed for dynamic torque sensing in applications requiring high precision and low torque measurement ranges from ±0.05 Nm to ±2 Nm (±0.04 to ±1.5 lbf.ft). Its robust design incorporates mechanical stops that safeguard the sensor against overloads up to ten times the nominal range, ensuring durability and long-term reliability.
This sensor is capable of accurate bidirectional torque measurements at rotational speeds of up to 2000 rpm, making it suitable for a wide range of dynamic testing environments. The optional onboard amplifier enhances signal quality by providing a high-level voltage output and minimizing noise through the slip ring assembly. This feature, along with the possibility of direct contact measurement, effectively eliminates contact residual drag torque, enhancing measurement accuracy.
Constructed with an aluminum shaft for reduced weight and keyed shaft couplings for secure installation, the CD1110 is designed for ease of integration into various mechanical setups. It offers both cable gland and connector outputs, catering to different system requirements. The integrated mechanical stops not only provide over-torque protection but also contribute to the sensor's overall robustness and reliability in demanding applications.
Dimensions & Wiring Schematic (In Metric And Imperial)
| Type | Rotary |
| Full Scale | 0.05 Nm |
| 0.1 Nm | |
| 0.35 Nm | |
| 0.5 Nm | |
| 1 Nm | |
| 2 Nm | |
| Precision | ±0.25 % FS |
| Excitation | 1V - 10 V DC |
| 10 V - 30 V DC | |
| IP Rating | IP50 |
| Min Temperature | -20 °C |
| Max Temperature | 80 °C |
- Low range dynamic applications
- Process control equipment
- Test and Measurement
- Robotics and effectors
- Laboratory and Research
| CD1110-A1 | |
| CD1110-A2 |
CD1110 Datasheet Datasheet |
- Range from ±5 to ±2,500 Nm (±4 to 2,000 lbf.ft)
- Keyed Shaft couplings
- Stainless Steel
- Cable Gland or Connector Output
- Slip ring measurement peaking
- High Stiffness
- Protection IP50
- High Level Output Model with Integrated Amplifier
| Type | Rotary |
| Full Scale | 5 Nm, 10 Nm, 20 Nm, 50 Nm, 75 Nm, 100 Nm, 150 Nm, 200 Nm, 300 Nm, 500 Nm, 750 Nm, 1000 Nm, 1700 Nm, 2500 Nm |
| Output | 2 mV/V |
| Precision | ±0.25 % FS |
| Excitation | 1V - 10 V DC, 10 V - 30 V DC, 15 V DC |
| Min Temperature | -20 °C |
- Range from ±5 to ±7,000 Nm (±4 to ±5,600 lbf.ft)
- Square Male Couplings
- Stainless Steel
- Cable Gland or Connector Output
- Slip ring measurement peaking
- High Stiffness
- Other square size available on custom design
- High Level Output Model with
| Type | Rotary |
| Full Scale | 5 Nm, 10 Nm, 20 Nm, 50 Nm, 100 Nm, 150 Nm, 200 Nm, 300 Nm, 500 Nm, 750 Nm, 1000 Nm, 2000 Nm, 3000 Nm, 4000 Nm, 5000 Nm, 7000 Nm |
| Output | 2 mV/V |
| Precision | ±0.25 % FS |
| Excitation | 1V - 10 V DC |
| Min Temperature | -20 °C |