8032-01, Stud mount Uniaxial Alcolmeter
- Industrial accelerometer
- Case isolated,
- Internal shielding
- Low-cost
- Molded strain relief
Designed to meet the rigorous demands of industrial environments, the 8032-01 accelerometer is housed in durable stainless steel and offers a stud mount for secure installation. With a dynamic range from ±50g to ±500g, this sensor is optimized for a wide array of industrial applications, including machine monitoring and condition assessment. The case isolated and internally shielded design ensures accurate and reliable measurements by minimizing electrical interference and signal distortion. The low-cost unit also features molded strain relief for enhanced durability and longevity. Operating within a temperature range of -40°C to 100°C, the compact dimensions (14.3 x 45.3 mm) of the 8032-01 make it an ideal choice for various industrial applications where space may be limited and cost-effectiveness is key.
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 50 g |
| 100 g | |
| 300 g | |
| 500 g | |
| Min Temperature | -40 °C |
| Max Temperature | 100 °C |
- Industrial applications
- Machine monitoring
- IEPE
- IEEE 1451.4 TEDS capabilities
- TEDS Operational Temperature Range: -40 to +85°C
- 10 mV/g, 20 mV/g, 50 mV/g, 100 mV/g, 200 mV/g or 500 mV/g sensitivity
- 25g, 50g, 100g, 250g, 500g range
- 1 to 10,000 Hz frequency range (±10%)
- 10-32 axial connector
- 10-32 tapped hole
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 25 g, 50 g, 100 g, 250 g, 500 g |
| Output | 10 mV/g, 20 mV/g, 50 mV/g, 100 mV/g, 200 mV/g, 500 mV/g |
| Excitation | 18 - 30 V DC |
| Material | Titanium |
- IEPE
- IEEE 1451.4 TEDS
- TEDS Operational Temperature Range: -40 to +85°C
- 10 mV/g, 50 mV/g, 100 mV/g, 200 mV/g or 500 mV/g sensitivity
- 10g, 25g, 50g, 100g, or 500g range
- 1 to 10,000 Hz frequency range (±10%)
- 10-32 radial connector
- 10-32 tapped hole
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 10 g, 25 g, 50 g, 100 g, 500 g |
| Output | 10 mV/g, 20 mV/g, 50 mV/g, 100 mV/g, 200 mV/g, 500 mV/g |
| Excitation | 18 - 30 V DC |
| Material | Titanium |
- DC Coupled, IEPE Interface
- ±50g, ±100g, ±500g Dynamic Ranges
- Flat Frequency Response up to 12kHz
- Hermetically Sealed Stainless Steel Construction
- Low Noise Output (down to 0.0004 g RMS)
- Shock Protection up to 5000g
- Case-Grounded Design for Noise Immunity
- Compact TO-5 Header Format
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 50 g, 100 g, 500 g |
| Excitation | 2 - 10 V DC |
| Material | Stainless Steel |
| Min Temperature | -40 °C |
- IEPE
- IEEE 1451.4 TEDS capabilities
- Low noise JFET electronics
- Unique cubic design
- 10 mV/g, 100 mV/g, or 500 mV/g sensitivity
- 10g, 50g or 500g range
- 1 to 10,000 Hz frequency range (±5%)
- 10-32 radial connector
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 10 g, 50 g, 500 g |
| Output | 10 mV/g, 50 mV/g, 100 mV/g |
| Excitation | 18 - 30 V DC |
| Material | Titanium |
- IEPE
- Cost Effective
- General Purpose
- 10 mV/g, 20 mV/g, 50 mV/g, 100 mV/g, 200 mV/g or 500 mV/g sensitivity
- 10g, 25g, 50g, 100g, 250g or 500g range
- 1 to 10,000 Hz frequency range (±5%)
- 10-32 radial connector
- 10-32 tapped hole
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 10 g, 25 g, 50 g, 100 g, 250 g, 500 g |
| Output | 10 mV/g, 20 mV/g, 50 mV/g, 100 mV/g, 200 mV/g, 500 mV/g |
| Excitation | 18 - 30 V DC |
| Material | Titanium |