KS813B, Triaxial Accelerometer
- Rugged industrial design
- Protection grade IP67
- Insulated base against ground loops
- Through hole for easy attachment
The KS813B Triaxial Accelerometer is designed for durability and precision in demanding industrial settings. Featuring a rugged stainless steel construction and an IP67 rating, it guarantees protection against dust and water ingress. Its insulated base prevents ground loops, ensuring accurate measurements. The accelerometer operates with an IEPE output and has a voltage sensitivity of 100 mV/g within a measurement range of ±55 g, withstanding up to 4000 g before destruction. Transverse sensitivity is kept below 5%, maintaining fidelity in readings.
Frequency responses range from 0.2 Hz to 10 kHz at a 3 dB limit, with resonant frequencies exceeding 15 kHz. It offers a stable bias voltage, low output impedance, and minimal residual noise across a wide band. The sensor's performance remains consistent over a temperature range of -20 to 90 °C and includes various cable and mounting accessories.
Typical Frequency Response
Temperature Coefficient
Noise Characteristics
| Type | Voltage Mode (IEPE) |
| # of Axis | 3 |
| Connection | BNC |
| Binder 718 | |
| Min Temperature | -20 °C |
| Max Temperature | 90 °C |
| Lower frequency limit (3 dB) | 0.2 Hz |
| Upper frequency limit (3 dB) | 10 kHz |
- Vibration monitoring in industrial machinery
- Precision equipment testing and calibration
- Structural health monitoring for civil engineering
- Automotive and aerospace testing for quality control
- Condition monitoring for predictive maintenance
| 034-B711f-BNC: | Adapter cable from Binder 711 to 3 BNC plugs, 0.5 m |
| 408 | Rare-earth magnetic base, M4 (fem.) |
| M29 | IEPE supply module |
| M14 | Vibration monitoring |
| 088-B718G-B711-5 | IEPE cable for triaxial accelerometers with Binder 718 and Binder 711 connectors |
| 088-B718G-PIG-5 | IEPE cable for triaxial accelerometers with Binder 718 connector and open ends |
KS813B Datasheet |
- Binder 711 female Connector on Sensor end
- BNC connector on Instrument end
- Temp. Range is -20 to 80 °C
- Cable Ø - 2,7 mm
- Quick delivery on quantity of 1 to 10.
- Binder 718 female Connector on Sensor end
- Binder 711 male connector on Instrument end
- Temp. Range is -20 to 80 °C
- Cable Ø - 5 mm
- Quick delivery on quantity of 1 to 10.
- Binder 718 female Connector on Sensor end
- Cable end sleeves on Instrument end
- Temp. Range is -20 to 80 °C
- Cable Ø - 5 mm
- Quick delivery on quantity of 1 to 10.
- Unity Gain
- BNC Input & Output Connectors
- Powered from 5 .. 28 VDC,
- Modules join together for powering multiple channels
| Input Type | 0 - 10 V AC, IEPE |
| # of Inputs | 1 |
| Output Type | ±10 V DC |
| Bandwidth | 20 kHz |
| Supply Power | 5 V DC, 10 - 30 V DC |
- Unbalance and bearing vibration monitoring
- Frequency-selective monitoring with FFT analysis
- Supports IEPE compatible sensors
- USB and RS-485 interfaces for configuration and communication
- RMS/peak monitoring with programmable filters
- Relay outputs for alarm and warning with adjustable thresholds
- Isolated 4-20 mA current loop output
- LED level bargraph for real-time monitoring
| Interface | USB, RS-485 |
| Input Type | AC voltage, IEPE |
| # of Inputs | 1 |
| Output Type | 4 - 20 mA |
| Supply Power | 12 - 28 V DC |
| Min Temperature | -40°C |