PY, Extreme Environment Non-Contact Displacement Transducer
The PY non-contact displacement transducer measures the distance between its front face and a target made from a ferritic material. A ferritic material is one which is attracted by a magnet. There are two types of PY transducer, a single...
Features:
- Magnetostrictive
- Submersible
- Non-Linear Output, Requires Linearization
- High Radiation & Temperature Resistance
- Cylindrical Profile Housing
- Stainless Steel Housing
- Connection: 2m Integral Cable (Longer Cable Available)
Manufacturer: RDP Electrosense
Quote
Datasheet
Description
Specifications
Models & Accessories
Downloads
Related Products
PY - Description
The PY non-contact displacement transducer measures the distance between its front face and a target made from a ferritic material. A ferritic material is one which is attracted by a magnet.
There are two types of PY transducer, a single coil version (which must be used in pairs) and a double coil version which can be used alone.
As the output of the PY is not linear, linearisation may be necessary depending on the application. Our 615 amplifier is designed for this.
There are two types of PY transducer, a single coil version (which must be used in pairs) and a double coil version which can be used alone.
As the output of the PY is not linear, linearisation may be necessary depending on the application. Our 615 amplifier is designed for this.
PY - Specifications
| Type | Magnetostrictive |
| Full Scale | 1.5 mm |
| 3 mm [0.125"] | |
| 6 mm | |
| Near Gap | 2.54 mm |
| 3 mm | |
| 6 mm | |
| Output | V/V AC |
| Non-Linearity | Non-Linear |
| Resolution | Infinitesimal |
| Excitation | 15 V AC |
| Min Temperature | -220 °C |
| Max Temperature | 600 °C |
PY - Models & Accessories
Models
| PY102 | |
| PY106 | |
| PY152 | |
| PY156 | |
| PY252 | |
| PY656 | |
| PY102C | |
| PY106C | |
| PY152C | |
| PY156C | |
| PY252C | |
| PY656C |
PY - Downloads
PY Series Overview Datasheet |
PY - Related Products
- In-line Amplifier
- For use with a wide range of LVDT or half-bridge transducers
- Screw terminal connections
- Simple controls for gain and zero adjustment
- Input zero and circuit test switch
- Signal overload indicator
- Excitation frequency change via resistor
- 115/230V supply selector switch
| Input Type | LVDT |
| # of Inputs | 1 |
| Output Type | ±10 V DC, 4 - 20 mA |
| Max Bandwidth | 500 Hz |
| Excitation | 5 V AC |
| Isolation | No |