CS80, 80 kN (8 Ton) Assembly Servo Press
- maximum Force Range 80kN, (8 Ton)
- Stroke ranges available – 100mm, 200mm and 350mm
- Maximum actuator speed of 130 mm/sec.
- Cyclic loading up to 70kN without damage
- Special Stroke Range of 400mm available
The CS80 has been redesigned for 60% more Force than the existing CS55. It has the same bolt pattern as the existing CS55, the new CS80 and the existing MS100.
It can move up to 200mm per second, with stroke ranges from 100 to 350mm
| Max Force | 80 kN |
| Max Speed | 135 mm/s |
| Stroke | 100 mm |
| 200 mm | |
| 350 mm | |
| 400 mm | |
| 500 mm | |
| Interface | Digital I/O |
| ProfiNet | |
| DeviceNet | |
| EthernetIP | |
| CC-Link |
| CS80-100 | 80kN Servo Press with 100 mm stroke |
| CS80-200 | 80kN Servo Press with 200 mm stroke |
| CS80-350 | 80kN Servo Press with 350 mm stroke |
| CS50, CS55 & CS80 Bellows | Rubber Bellows for CS50-100, CS50-200, CS50-350, CS55-100, CS55-200, CS55-350, CS80-100, CS80-200 & CS80-350 Tools |
Instruction Video, Coretec CPS Controller Ethernet TCP/IP communication setup using the Coretec CPS Configuration Software
Instruction Video, Coretec CPS Controller Ethernet IP Feildbus to PLC communication setup using the Coretec CPS Configuration Software
Instruction Video, Coretec CS Series Servo Press Initialization & Auto Generation Programming using CORETEC CPS-SP Configurator.
The procedure is identical for BS/MS series Servo Press Programming which uses BS-SP Configurator.
This video also discusses the Ethernet TCP/IP Communication Setup with the PLC and Manual Operation of the Servo Press Tool. This is similar to setup and communication with ProfiNet communication to and from a PLC.
Instruction Video, Coretec WPS Controller Ethernet TCP/IP communication setup using the Coretec WPS Configuration Software
Instruction Video, Coretec WPS Controller Ethernet IP Feildbus to PLC communication setup using the Coretec WPS Configuration Software
CS50, CS55 & CS80 Bellows Drawings |
AC Servo Presses Brochure |
CS50, CS55 & CS80 Bellows Drawings |
WPS Servo Press Controller App Note |
- Maximum Force Range, 55 kN (5.5 Ton)
- Stroke ranges available – 100mm, 200mm & 350mm
- Maximum actuator speed of 200 mm/sec.
- Cyclic loading up to 45kN without damage
- Special Stroke Range of 500mm
| Max Force | 55 kN |
| Max Speed | 200 mm/s |
| Stroke | 100 mm, 200 mm, 350 mm, 400 mm, 500 mm |
| Interface | Digital I/O, ProfiNet, DeviceNet, EthernetIP, CC-Link |
- Force range of 50 kN
- Stroke ranges available up to 350 mm
- Maximum speeds of up to 150 mm/s
- PC independent Force vs. Displacement Signature
- Analysis using: Limits, Envelopes, Windows
- All popular PLC Interfaces: EthernetIP, Digital I/O, DeviceNet, Profibus, CC-Link
- All limits, data and program info can be read and written through the PLC
| Max Force | 50 kN |
| Max Speed | 150 mm/s |
| Stroke | 100 mm, 200 mm, 350 mm |
| Interface | Digital I/O, Profibus, DeviceNet, EthernetIP, CC-Link |
- maximum Force Range, 30kN (3 Ton)
- Stroke ranges available – 100mm, 200mm and 350mm
- Special Stroke Range of 400 & 500mm
- Maximum actuator speed of 130 mm/sec.
- Cyclic loading up to 21kN without damage
| Max Force | 30 kN |
| Max Speed | 130 mm/s |
| Stroke | 100 mm, 200 mm, 350 mm, 400 mm, 500 mm |
| Interface | Digital I/O, ProfiNet, DeviceNet, EthernetIP, CC-Link |
- maximum Force Range, 50kN (5 Ton)
- Stroke ranges available – 100mm, 200mm and 350mm
- Maximum actuator speed of 250 mm/sec.
- Cyclic loading up to 45kN without damage
- Special Stroke Range of 500mm
| Max Force | 50 kN |
| Max Speed | 250 mm/s |
| Stroke | 100 mm, 200 mm, 350 mm, 400 mm, 500 mm |
| Interface | Digital I/O, ProfiNet, DeviceNet, EthernetIP, CC-Link |