KB12VD, Ultra High Sensitivity Accelerometers
The Sensitivity of these Accelerometers makes them well suited for seismic measurements, structural and building vibration. Air damping for resonance attenuation and overload protection by friction coupling is incorporated.
Features:
- Extremely sensitive piezo system provides high resolution & low noise
- High sensitivity-to-mass ratio, excellent for low frequencies
- Full Range is +/-0.6g with a 200g over-range protection
- IEPE voltage output
- Operating Temperature: -20 to 120 degC.
Manufacturer: MMF
Quote
Datasheet
Description
Specifications
Models & Accessories
Downloads
Related Products
Similar Products
KB12VD - Description
Ultra High Sensitivity Accelerometer
KB12VD - Specifications
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 5 g |
| Output | 1000 mV/g |
| Material | Stainless Steel |
| Mounting | Tapped Hole |
| Max Temperature | 120 °C |
KB12VD - Models & Accessories
Accessories
| 003 | Stud bolt M5 x 8 |
| 008 | Rare-earth magnetic base, M5 (male) |
| 009-UNF-BNC-1,5 | Low-noise cable UNF 10-32 / BNC; 1,5 m |
KB12VD - Downloads
KB12VD Ultra High Sensitivity Accelerometers Datasheet |
KB12VD - Related Products
Quote
Datasheet
M72A1 / M72S1 / M72A3 - 1 – 3 channel Desktop / Rack Mount charge or IEPE Signal Conditioners - Gain Selections: 0,1 / 1 / 10 / 100 / 1000 mV/pC; 0 / 20 / 40 / 60 dB
- Single and Double Integrators
- Low pass filters: 0.1 / 1 / 10 / 50 kHz
- High pass filters: 0.1 / 3 Hz
- 4 digit mV or pC LED display(s)
- Input & Output BNC connectors
- USB interface on M72S8, Rack Case
- Power Supply: 7-30Vdc, 115 Vac Adaptor
| Input Type | 0 - 10 V AC, Piezoelectric (IEPE) |
| # of Inputs | 1, 3 |
| Output Type | ±10 V DC |
| Max Bandwidth | 50 kHz |
| Supply Power | 9 V DC (Battery), 24 - 30 V DC, 115 V AC |
- Displays vibration acceleration velocity and displacement
- provides RMS, positive/negative peak, peak-to-peak, instantaneous value
- Main frequency and harmonic distortion additionally in VM-METER+
- Rotation speed measurement with photo-elelectric reflex switch at digital input
- High pass and low pass filters with high slope
- allows synchronous display in up to four windows
- Recording of vibration signals in binary or text format
PC based measuring system software, that using the IEPE / USB interfaces M302/M312 and IEPE compatible accelerometers.
- Gains of 1, 10, 100 & 1000
- Low pass filter modules: (FB2); 0.1 .. 30 kHz, optional
- High pass filter modules: (FB3); 3 .. 1000 Hz; optional
- BNC Input & Output Connectors
- Powered from 5 .. 28 VDC, modules join together
| Input Type | 0 - 10 V AC |
| # of Inputs | 1 |
| Output Type | ±10 V DC |
| Bandwidth | 20 kHz |
| Supply Power | 5 V DC, 10 - 30 V DC |
- UNF 10-32 Connector on Sensor end
- BNC connector on Instrument end
- Temp. Range is -20 to 120 °C
- Cable Ø - 2,1 mm and 2,7 mm
- Quick delivery on quantity of 1 to 10.
This cable is for charging/IEPE, can be provided in lengths from 3 ft. (1 m) up to 30 ft. (10 m).
KB12VD - Similar Products
- 10 mV/g to 100 mV/g
- acceleration and velocity transmitters
- Sealed to IP67
- Cabling for high temperature, Water & Oil Resistant
- Linear Frequency of 0.13 to 22000 Hz
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 5 g, 50 g, 500 g |
| Output | 10 mV/g, 100 mV/g |
| Material | Stainless Steel |
| Mounting | Tapped Hole, M5 Thread |
- Extremely sensitive piezo system provides excellent resolution and low noise floor
- KS48C with IEPE voltage output
- Stainless Steel housing with IP67 protection
- M8 mounting thread
- 1000g max. protection by friction coupling
- KS48C with IEPE voltage output
- KS48C with protection grade IP67
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 0.5 g |
| Output | 10000 mV/g |
| Material | Aluminum |
| Mounting | Tapped Hole |
- 10 mV/g to 100 mV/g
- acceleration and velocity transmitters
- Sealed to IP67
- Cabling for high temperature, Water & Oil Resistant available
- Linear Frequency of 0.13 to 22000 Hz
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 50 g |
| Output | 100 mV/g |
| Material | Stainless Steel |
| Mounting | Tapped Hole |
- High sensitivity
- IEPE
- 1,000 mV/g sensitivity
- 5g range
- 1 to 1,000 Hz frequency range (±5%)
- 10-32 radial connector
- 10-32 tapped hole
- Weight: 55 grams
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 5 g |
| Output | 1000 mV/g |
| Excitation | 18 - 30 V DC |
| Material | Stainless Steel |
- High sensitivity
- IEPE
- IEEE 1451.4 TEDS capabilities
- 1,000 mV/g sensitivity
- 5g range
- 1 to 1,000 Hz frequency range (±5%)
- 10-32 radial connector
- 10-32 tapped hole
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 5 g |
| Output | 1000 mV/g |
| Excitation | 18 - 30 V DC |
| Material | Stainless Steel |