VM-METER, Vibration Measurement & Display Software
PC based measuring system software, that using the IEPE / USB interfaces M302/M312 and IEPE compatible accelerometers.
Features:
- Displays vibration acceleration velocity and displacement
- provides RMS, positive/negative peak, peak-to-peak, instantaneous value
- Main frequency and harmonic distortion additionally in VM-METER+
- Rotation speed measurement with photo-elelectric reflex switch at digital input
- High pass and low pass filters with high slope
- allows synchronous display in up to four windows
- Recording of vibration signals in binary or text format
Manufacturer: MMF
Quote
Datasheet
Models & Accessories
Downloads
Related Products
VM-METER - Models & Accessories
Models
| VM-METER+ | PC Software that Displays Acceleration, Vibration & Displacement |
| VM-REC | Recording of vibration signals in binary or text format for later analysis, it is capable of Level triggered recording with Pre & post trigger sampling. |
| VM-METER SE | VM-METER SE combines licenses VM-SE FMP and VM-SE FMS |
| VM-METER+ | Complete VM-METER functionality |
| VM-REC+ | Complete functionality of VM-REC |
VM-METER - Downloads
VM-Meter Rec Vibration Monitoring Software Datasheet |
VM-METER - Related Products
- High dynamic range, good resolution
- Convenient calibration with sensor database
- Short training period due to modular software concept
- External messaging via email or radio control system
- Offline diagnosis with stored measuring data
- Frequency Range: 0.3 .. 2000 Hz (-3 dB)
- Input Ranges: ±10000 mV, ±1000 mV, ±100 mV
- A/D: 16 Bit, 10 kHz / Channel
| Input Type | Voltage |
| Analog Inputs | 2 |
| Digital Inputs | 2 |
- High dynamic range: 0.1 to 40,000 Hz
- A/D resolution: 24 bit
- Input Ranges: ±8000 mV, ±800 mV, ±80 mV
- TEDS: to IEEE 1451.4 standard
- Convenient calibration with sensor database
- Digital triggers: 2 at 0 .. 24 V, threshold: 1.5 V
| Input Type | Voltage |
| Analog Inputs | 2 |
| Digital Inputs | 2 |
- IEPE output: precision accelerometer with shear ceramics
- Sensitivity: 10mV/g to 100mV/g
- Well suited for Modal and Structural Analysis
- Maximum 8000 g
- Frequency Response: 0.2Hz to 16kHz, -3db
- Operating Temperature: -20 to 120 deg.C
- Clip Mounting in 3 directions
- TEDS
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 50 g, 500 g |
| Output | 10 mV/g, 100 mV/g |
| Material | Stainless Steel |
| Connection | 10-32 Micro Coaxial |
- Output: IEPE with TEDS
- Sensitivity: 10mV/g & 100mV/g
- Linear Frequency Response: 0.15 to 22000 Hz
- Connector: 4 pins, 1/4-28 UNF, male
- Ranges: ±60g & ±600g
| Type | Voltage Mode (IEPE) |
| # of Axis | 3 |
| Full Scale | 50 g, 500 g |
| Output | 10 mV/g, 100 mV/g |
| Mounting | 1/4-28 Tapped Hole |
| Connection | 4-Pin Radial Connector |
- Low sensitivity to temperature transients
- Low influence of base bending effects
- charge mode does not need external power
- Wide dynamic range
- Operating temperature up to 250 °C (480 °F)
- High resonant frequency
- Durable stainless steel housing
- M5 mounting thread in base
| Type | Charge Mode |
| # of Axis | 1 |
| Full Scale | 3000 g |
| Output | 15 pC/g |
| Material | Stainless Steel |
| Mounting | M5 Thread |
- Output Sensitivity: 100 mV/g
- acceleration and velocity transmitters
- Sealed to IP67
- Cabling for high temperature, Water & Oil Resistant
- Linear Frequency of 0.13 to 22000 Hz
| Type | Voltage Mode (IEPE) |
| # of Axis | 1 |
| Full Scale | 50 g |
| Output | 100 mV/g |
| Material | Stainless Steel |
| Mounting | Thru Hole |