EPSI-AX-mV, Strain Sensor with mV output
This sensor is well suited to outdoors and harsh environment applications such as on-board weighing of vehicles, overload control on lift trucks, sea port installations, beam deflection of engineering structures & level of tanks or outdoor silos.
Features:
- Made of stainless steel & sealed to IP68
- Very stiff design & High Output Sensitivity
- Digital Temperature Compensation of the thermal expansion
- Operates from -40 up to +70°C
- Power required, 2 to 10 Vdc
- Output of 1mV/V for ±500 µm/m, (microstrain)
Manufacturer: Scaime
Quote
Datasheet
Models & Accessories
Downloads
Related Products
EPSI-AX-mV - Models & Accessories
Models
| EPSI-AX-mV | milli-Volt Bolt-on Strain Sensor with 5m or 10m cable lengths |
| ESPI AX-V | Volt Bolt-on Strain Sensor with 5m or 10m cable lengths |
EPSI-AX-mV - Downloads
EPSIAX-mV Strain Sensor Datasheet |
EPSI-Mounting & Accessoires Product Note |
TN-Silo weighing extensometer-0114_ATI Tech Note |
EPSI-AX-mV - Related Products
- The CPJ is able to run up to 4 Strain Gauge load cells (350 ohm)
- 4 or 6 wire load cells ( power for up to 4 sensors)
- Excitation - Selectable
- Voltage output (±10 Vdc or 0-10 Vdc) and current output (4-20 mA)
- Shunt Calibration signal
- 2 set points on Relays optional version CPJ2S
- IP65 Housing option (CPJ model ONLY)
- Din rail mount
| Input Type | Potentiometer, Strain Gauge |
| # of Inputs | 1 |
| Output Type | 0 - 10 V DC, ±10 V DC, 4 - 20 mA |
| Isolation | Yes |
| Supply Power | 20 - 28 V DC |
| IP Rating | IP 65 |
- Powerful built in programmable filters for digital smoothing
- Static, Dynamic measurement
- Fully configurable with eNodView software (freeware)
- Operation with or without PLC, Standalone or modular
- Simultaneous local HMI & PLC communication
- Ethernet/IP and Field Bus options
- 24 bit A/D, for 1:100,000 resolution
- Supplies up to 8 strain gage load cells (350 Ohm)
The eNod4-T provides physical or theoretical weighing calibration, 4 set point management. It offers high resolution, fast response and flexible communication for Hopper, Silo & Tank Level Weighing.
- ±0.2, ±2, ±20, ±200, ±300V & ±600V DC voltage ranges
- ±2, ±20, ±200 mA and ±5A DC current ranges
- 99.99% full scale accuracy ±2 counts
- Front panel scalable to ±99,999 for use with current shunts
- Transducer excitation output, 5, 10 or 24 Vdc (isolated)
- Universal 85-264 Vac / 90-300 Vdc or 10-48 Vdc / 12-32 Vac power
- Wide choice of options:
- 2 or 4 relays, mechanical or solid state (isolated)
Laureate™ DC voltage and current panel meters with a DC signal conditioner board combine high accuracy with high read rate and a wide range of isolated output options for computer interface and control. Accuracy is 99.99% of full scale ±2 counts.