8526, Burster Load Cell, Miniature Compression
- Static & Dynamic Measurements
- Compression
- Accuracy: Range ≤ 1 kN: ≤ ±0.25% F.S.
- Accuracy: Range ≥ 2 kN: ≤ ±0.50% F.S.
- Outer Diameter: 31.8mm - 76.2mm
- Height: 9.9mm - 38.1mm
- Connection: 2m Integral Cable
- Stainless Steel
- Threaded Holes on Bottom for Mounting
The Burster model, 8526 load cell is designe
d as a flat, circular disc. 4 strain gauges are applied at the measuring element of the sensor body. The measuring element inside the body carries a strain gauge full bridge which outputs a voltage directly proportional to the measurement variable on the application of a force.
The load application knob for receiving compressive forces is an integral part of the sensor. The compressive force must be applied with a part that leans on a sensor parallel plain with reference to the application knob. This ensures only
minor influence of smaller angle faults between the force application and the sensor axis to the measurement signal. Basically the measurement force must be applied centrically without any lateral vectors of force.
A ground bearing surface for the sensor as well as a hardness of at least 60 HRC of the bearing surface of the force application are precondition for an optimum in measurement quality.
The standardized nominal value (1 mV/V) simplifies the exchange of sensors. Furthermore the sensors can be switched parallel for the summation of singular forces.
| Type | Load Button |
| Application | Compression |
| Full Scale | 22 lbs |
| 45 lbs | |
| 112 lbs | |
| 220 lbs | |
| 450 lbs | |
| 1120 lbs | |
| 2200 lbs | |
| 4500 lbs | |
| 11200 lbs | |
| 22000 lbs | |
| 45000 lbs | |
| Output | 1 mV/V |
| Precision | ±0.25 % FS |
| ±0.5 % FS | |
| Excitation | 5 V DC |
| 10 V DC | |
| IP Rating | IP64 |
| Min Temperature | -20 °C |
| Max Temperature | 100 °C |
A high performance to price ratio and robust design characterize the compression load cells even in the high measuring ranges. Their small dimensions allow these load cells to be used for measuring static and dynamic compressive forces
in restricted spaces.
The Miniature Burster 8526 load cell has a sealed body, allowing it to be used even under dirty and harsh industrial conditions.
Application Uses:
- Device manufacture
- Production lines
- Measurement and control systems
- Manufacture of fixtures and special machines
- Geological applications
| 8526-5100 | 100N (22.5bs); 31.8 mm O.D.; 9.9mm Height |
| 8526-5200 | 200N (45 lbs); 31.8 mm O.D.; 9.9mm Height |
| 8526-5500 | 500N (112.5 lbs); 31.8 mm O.D.; 9.9mm Height |
| 8526-6001 | 1000N (224 lbs); 31.8 mm O.D.; 9.9mm Height |
| 8526-6002 | 2000N (450 lbs); 31.8 mm O.D.; 9.9mm Height |
| 8526-6005 | 5000N (1120 lbs); 31.8 mm O.D.; 9.9mm Height |
| 8526-6010 | 10000N (2240 lbs); 31.8 mm O.D.; 9.9mm Height |
| 8526-6020 | 20000N (4500 lbs); 38.1 mm O.D.; 16mm Height |
| 8526-6050 | 50000N (11200 lbs); 38.1 mm O.D.; 16mm Height |
| 8526-6100 | 100000N (22400 lbs); 50.8 mm O.D.; 25.4mm Height |
| 8526-6200 | 200000N (45000 lbs); 76.2 mm O.D.; 38.1mm Height |
| 8526-6500 | 500000N (112000 lbs); 120 mm O.D.; 50mm Height |
| 8526-7001 | 1,000,000N (224,000 lbs); 200 mm O.D.; 90mm Height |
8526, Miniature Compression Load Cell Datasheet |
8526-5100 CAD Drawing Drawings |
8526-5200 CAD Drawing Drawings |
8526-5500 CAD Drawing Drawings |
8526-6001 CAD Drawing Drawings |
8526-6002 CAD Drawing Drawings |
8526-6005 CAD Drawing Drawings |
8526-6010 CAD Drawing Drawings |
8526-6020 CAD Drawing Drawings |
8526-6050 CAD Drawing Drawings |
8526-6100 CAD Drawing Drawings |
8526-6200 CAD Drawing Drawings |
- Strain Gauge & Potentiometer Input Amplifier
- 50 V Continuous Isolation
- Accuracy: ± 0.05%
- DIN Rail Mounted
- In-Line Amplifier (Option)
- Aluminum Housing
- Protection Class: IP40
| Input Type | 0 - 10 mV DC, 0 - 100 mV DC, 0 - 1 V DC, 0 - 10 V DC, ±10 V DC, Potentiometer, Strain Gauge |
| # of Inputs | 1 |
| Output Type | ±5 V DC, ±10 V DC, 0 - 20 mA, 4 - 20 mA |
| Max Bandwidth | 1 kHz, 4 kHz |
| Excitation | 2.5 V DC, 5 V DC, 10 V DC |
| Isolation | Yes |
- Powerful built in programmable filters for digital smoothing
- Static, Dynamic measurement
- Fully configurable with eNodView software (freeware)
- Operation with or without PLC, Standalone or modular
- Simultaneous local HMI & PLC communication
- Ethernet/IP and Field Bus options
- 24 bit A/D, for 1:100,000 resolution
- Supplies up to 8 strain gage load cells (350 Ohm)
- RF Impedance
- Probe Based
- Compatible with L840 Series Probes
- Wide Variety of Liquid & Solid Media
- Explosion Proof: NEMA 4 Class I, II & III
- Cast Aluminum Housing
- 10-Year Warranty
- NULL-KOTE™ Circuitry
| Type | Probe Contact |
| Full Scale | 1 - 5 ft |
| Output | Relay |
| Excitation | 17 - 34 V DC, 95 - 135 V AC, 205 - 250 V AC |
| IP Rating | NEMA 4 |
| Min Temperature | -184 °C |
- Integration via PROFIBUS, PROFINET or EtherNet/IP
- Automatic sensor recognition from burster TEDS
- 3.5" color touch screen display
- 16 measurement programs
- Rapid data logging on USB flash drive
- New evaluation elements (trapezoid window and thresholds)
- User-configurable I/Os and 6 real-time switching signals
- Smart auto setup for evaluation elements
| Input Type | DC Voltage, Potentiometer, Strain Gauge, ICP |
| # of Inputs | 2 |
| Max Sample Rate | 5 kHz |
| Evaluation | Threshold, Envelopes, Windows |
| Interface | Digital I/O, Profibus, Profinet, Ethernet/IP |
| Communication | Ethernet, USB |
- Compression
- Accuracy Class: ±0.1% or ±0.3%
- Outer Diameter: 49.5mm - 150.0mm
- Height: 30.0mm - 80.0mm
- Connection: 3m Integral Cable
- Stainless Steel
| Type | Load Button |
| Application | Compression |
| Full Scale | 220 lbs, 450 lbs, 1120 lbs, 2200 lbs, 4500 lbs, 11200 lbs, 22000 lbs, 45000 lbs, 112000 lbs, 225000 lbs |
| Output | 2 mV/V |
| Precision | ±0.1 % FS, ±0.3 % FS |
| Excitation | 2 V - 12 V DC |