Dx Digital Multi-Channel Telemetry, Modular Digital Multi-Channel Telemetry System
A telemetry system that uses wireless data transmission for measurement of rotating objects, to a stationary receiver. Measurements are reliable, precise and highly versatile, up to 4 measurement sites with fast and convenient set up.
Features:
- Up to six analog inputs per transmitter unit: strain gauges, temperatures, analog signals, freely programmable
- Sampling rate up to 4,8 kHz (16 bit) per channel
- Synchronous data collection and processing of up to 4 transmitters (SCTs)
- Integrated standard interfaces: Analog, CAN, Ethernet
- Extended Temperature available -40 °C to +125 °C (Dx-HT)
- Measurement value output in physical units available
- No authorization required for radio transmission (2.4 GHz band)
- Convenient parametrization by RemusLAB software or web browser
- Transmitter housing made of PEEK: heat and impact-resistant
- Plated-through soldering points: No soldering pads!
- Online monitoring of all measurement values and additional channels: transmitter temperature, power supply, signal strength
Manufacturer: CAEMAX imc group
Quote
Datasheet
Description
Specifications
Models & Accessories
Downloads
Similar Products
Dx Digital Multi-Channel Telemetry - Description
Up to 4 transmitters (SCTs) with several channels each can be operated with one receiver unit (RCI). The Die conditioned and digitized (16 bit) signals are then transmitted serially in the 868 MHz or 2.4 GHz band and are then available at the receiver as analog signals and CAN messages (Ethernet data output optional).
For even greater flexibility, power supply of the transmitters and data transmission are not coupled: user can decide the appropriate type of power supply (battery or inductive) for any new measurement task.
Parameterize the system directly at the receiver unit interface, by the software RemusLAB or by arbitrary web browser of your PC using the integrated web interface. Integrate new transmitters, change measurement range, sensor type and much more - all of that with just a few clicks!
Dx Digital Multi-Channel Telemetry - Specifications
| Input Types | Strain Gauge |
| Vdc | |
| Temperature | |
| Frequency | |
| No. of Inputs | 2-20 |
| Output | Analog |
| CANbus |
Dx Digital Multi-Channel Telemetry - Models & Accessories
Models
| TELE/CMX-DX-SCT | Dˣ- Rotor Electronic |
| TELE/CMX-DX-SCT-ET | in extended temperature range (-40°C to 125°C) |
| TELE/CMX-DX-RCI | Receiver, Control- and Interface Unit |
| TELE/CMX-DX-RCI-ET | in extended temperature range (-40°C to 125°C) |
| TELE/CMX-DX-LOG | Dˣ-Option Internal Data Logging (SD Card) |
Dx Digital Multi-Channel Telemetry - Downloads
Caemax D ͯ Telemetry System Datasheet |
Dx Digital Multi-Channel Telemetry - Similar Products
- Steering torque range ±100 Nm or ±200 Nm
- Steering angle range ±1474,56°
- Rotational velocity range ±1000°/sec
- Acceleration in x, y, z (optional)
- Rotational acceleration (optional)
- CAN and analog output
- Online monitoring of all channels in physical values
- Inductive power supply by control unit
| Input Types | Strain Gauge, Vdc |
| No. of Inputs | 2-20 |
| Output | Analog, CANbus |
- Measurement of driving and breaking torques
- sealed IP67 (waterproof)
- Transmitter electronics integrated in sensor
- My = 3.000 Nm (4.500 Nm optional)
- Power supply: rechargeable battery (approx. 50 h operating time)
- Working temperature (Sensor): -10°C … +60°C
- Programmable amplifiers with autozero function
- Convenient parameterization by RemusLAB or webbrowser
| Input Types | Strain Gauge, Temperature |
| No. of Inputs | 2-20 |
| Output | Analog, Ethernet, CANbus |
- Static & Dynamic measurements up to 24,000 Hz
- 2 to 64 channel systems
- Inputs for Strain Gauges, Temperature, ICP sensors or Voltages
- 4 Vdc Excitation & Gains selectable, 125, 250, 500, 1000 or 2000
- 16 bit ADC, simultaneous sampling
- Full software programmable & Auto Zero calibration
- Inductive or battery powered
- Rugged, water proof housing
| Input Types | Strain Gauge, Vdc, Temperature |
| No. of Inputs | 8 +, 2-20 |
| Output | Analog |
- Waterproof (IP66, IP67)
- Ideal for brake testing due to excellent heat dissipation
- Removable stator for convenient balancing of wheels
- Online zeroing - system is ready to measure after three turns of the wheel
- Measurement range: Fx, Fz = ±45 kN, Fy = ±25 kN, Mx, My, Mz = 8.75 kNm
- Angular resolution 0.072°
- Working temperature range (sensor): -40°C to +150°C
- Convenient parameterization with software RemusLAB
| Input Types | Strain Gauge |
| No. of Inputs | 2-20 |
| Output | Analog, Ethernet, CANbus |
- 16 bit resolution A/D
- Simultaneous Sampling of all Channels
- Bandwidth up to 24kHz for the 4 Channel System
- Radio Telemetry Transmission
- Uses 1 Data Transmission Module, with up to 16 Input Modules
- Water Resistant - IP65 modules
- Powered from 7-30 Vdc
| Input Types | Strain Gauge, Vdc, Temperature, IEPE-ICP |
| No. of Inputs | 2-20 |
| Output | Analog, Ethernet |