Loading...
A-Tech Instruments Ltd.
Fran├žais   |   Welcome. Please Register an Account or Login

MTP - Multi Channel Telemetry System, Wireless Data Acquisition

The MTP telemetry is a small and flexible telemetry system for rotating applications. Each sensor module (2-channel) is equipped with signal conditioning, anti-aliasing filters, analog-to-digital converters and a digital output.
MTP - Multi channel telemetry system
MTP - Multi channel telemetry system
Features:
  • Static & Dynamic measurements up to 24,000 Hz
  • 2 to 64 channel systems
  • Inputs for Strain Gauges, Temperature, ICP sensors or Voltages
  • 4 Vdc Excitation & Gains selectable, 125, 250, 500, 1000 or 2000
  • 16 bit ADC, simultaneous sampling
  • Full software programmable & Auto Zero calibration
  • Inductive or battery powered
  • Rugged, water proof housing
  • Digital data interface to PC & +/-10V Analog Output
Quote
Datasheet
Description
Specifications
Applications
Models & Accessories
Downloads
Similar Products
MTP - Multi Channel Telemetry System - Description

: The MTP telemetry is a small and flexible telemetry system for rotating applications. Each sensor module (2-channel) is equipped with signal conditioning, anti-aliasing filters, analog-to-digital converters and a digital output.

These modules (up to 32 through 64 chns) are controlled by an MTP-Controller module. The acquisition modules are mounted close to the sensors or strain gauges, reducing noise in the signals, and transmit the measurement using a PCM bit stream to the MTP-Controller. The MTP-Controller support a transmitter module for distances of up to 0.1m with inductive telemetry transmission or up to 10m with radio telemetry transmission.

MTP - Multi Channel Telemetry System - Specifications
Input TypesStrain Gauge
Vdc
Temperature
No. of Inputs8 +
2-20
OutputAnalog
MTP - Multi Channel Telemetry System - Applications

For numerous rotating applications in Wind Turbine Power Generators, Diesel Generator Sets and Hydro Power Generation.

Hydro Power Turbine Installation 

 

MTP - Multi Channel Telemetry System - Models & Accessories
Models
MTPMulti Channel Telemetry System
MTP-VOLTAcquisition Module For 2x high Level Inputs
MTP-STGAcquisition module for 2 strain gages Full, half and quarter bridge
MTP-ICPAcquisition module for 2 ICP sensors
MTP-TH-KAcquisition module for 2x TH-K Inputs galvanic isolated Range -50 to 1000°C, -50 to 500°C
MTP-Pt100/1000Acquisition module for 2 RTD sensors Range -100 to 600°C, -50 to 300°C
MTP-CONTROLController 1- 32 acquisition modules Output: PCM
MTP-DEC8Receiver unit for max 8 Channels
MTP-DEC16Receiver unit for max16 Channels
MTP-DEC24Receiver unit for max 24 Channels
MTP-DEC32Receiver unit for max 32 Channels
MTP -BNC16BNC Box
MTP -BNC32BNC Box
MTP - Multi Channel Telemetry System - Downloads
MTP - Multi Channel Telemetry System - Similar Products
  • Up to six analog inputs per transmitter unit: strain gauges, temperatures, analog signals, freely programmable
  • Sampling rate up to 4,8 kHz (16 bit) per channel
  • Synchronous data collection and processing of up to 4 transmitters (SCTs)
  • Integrated standard interfaces: Analog, CAN, Ethernet
  • Extended Temperature available -40 °C to +125 °C (Dx-HT)
  • Measurement value output in physical units available
  • No authorization required for radio transmission (2.4 GHz band)
  • Convenient parametrization by RemusLAB software or web browser
Input Types
Strain Gauge,
Vdc,
Temperature,
Frequency
No. of Inputs
2-20
Output
Analog,
CANbus
  • 16 bit resolution A/D
  • Simultaneous Sampling of all Channels
  • Bandwidth up to 24kHz for the 4 Channel System
  • Radio Telemetry Transmission
  • Uses 1 Data Transmission Module, with up to 16 Input Modules
  • Water Resistant - IP65 modules
  • Powered from 7-30 Vdc
Input Types
Strain Gauge,
Vdc,
Temperature,
IEPE-ICP
No. of Inputs
2-20
Output
Analog,
Ethernet
  • Steering torque range ±100 Nm or ±200 Nm
  • Steering angle range ±1474,56°
  • Rotational velocity range ±1000°/sec
  • Acceleration in x, y, z (optional)
  • Rotational acceleration (optional)
  • CAN and analog output
  • Online monitoring of all channels in physical values
  • Inductive power supply by control unit
Input Types
Strain Gauge,
Vdc
No. of Inputs
2-20
Output
Analog,
CANbus
  • Measurement of driving and breaking torques
  • sealed IP67 (waterproof)
  • Transmitter electronics integrated in sensor
  • My = 3.000 Nm (4.500 Nm optional)
  • Power supply: rechargeable battery (approx. 50 h operating time)
  • Working temperature (Sensor): -10°C … +60°C
  • Programmable amplifiers with autozero function
  • Convenient parameterization by RemusLAB or webbrowser
Input Types
Strain Gauge,
Temperature
No. of Inputs
2-20
Output
Analog,
Ethernet,
CANbus
Products    |    Applications    |    Services    |    Partners    |    About Us    |    Contact Us
© A-Tech Instruments Ltd.