CTP4-8-16-PCM, Multi-Channel Telemetry / Wireless Measurement System
These 4/8/16-channel Telemetry Systems accommodate various input types and can achieve a High Transmission rate, up to 5Mbit/s. Strain Gauge Sensors, K-type TC, Vdc & ICP/IEPE can be measured.
Features:
- 16 bit resolution A/D
- Simultaneous Sampling of all Channels
- Bandwidth up to 24kHz for the 4 Channel System
- Radio Telemetry Transmission
- Uses 1 Data Transmission Module, with up to 16 Input Modules
- Water Resistant - IP65 modules
- Powered from 7-30 Vdc
Manufacturer: KMT Telemetry
Quote
Brochure
Specifications
Models & Accessories
Downloads
Similar Products
CTP4-8-16-PCM - Specifications
| Input Types | Strain Gauge |
| Vdc | |
| Temperature | |
| IEPE-ICP | |
| No. of Inputs | 2-20 |
| Output | Analog |
| Ethernet |
CTP4-8-16-PCM - Models & Accessories
Models
| CTP-STG-V3 | Strain Gauge Transmitter |
| CTP-ICP®-V3 | IEPE - ICP Transmitter Module |
| CTP-Pt100/1000 (RTD) V3 | Pt100/1000 (RTD) Transmitter module |
| CTP-VOLT-V3 | Voltage Input Transmitter Module |
| CTP-TH-K-V3 | Type K Thermocouple Input Transmitter Module |
| CTP-CONTROL-V3 | Transmitter Control - Data Transmission Module |
CTP4-8-16-PCM - Downloads
CTP4-8-16 Channel Telemetry Systems Brochure |
CTP4-8-16-PCM - Similar Products
- Measurement of driving and breaking torques
- sealed IP67 (waterproof)
- Transmitter electronics integrated in sensor
- My = 3.000 Nm (4.500 Nm optional)
- Power supply: rechargeable battery (approx. 50 h operating time)
- Working temperature (Sensor): -10°C … +60°C
- Programmable amplifiers with autozero function
- Convenient parameterization by RemusLAB or webbrowser
| Input Types | Strain Gauge, Temperature |
| No. of Inputs | 2-20 |
| Output | Analog, Ethernet, CANbus |
- Static & Dynamic measurements up to 24,000 Hz
- 2 to 64 channel systems
- Inputs for Strain Gauges, Temperature, ICP sensors or Voltages
- 4 Vdc Excitation & Gains selectable, 125, 250, 500, 1000 or 2000
- 16 bit ADC, simultaneous sampling
- Full software programmable & Auto Zero calibration
- Inductive or battery powered
- Rugged, water proof housing
| Input Types | Strain Gauge, Vdc, Temperature |
| No. of Inputs | 8 +, 2-20 |
| Output | Analog |
- Up to six analog inputs per transmitter unit: strain gauges, temperatures, analog signals, freely programmable
- Sampling rate up to 4,8 kHz (16 bit) per channel
- Synchronous data collection and processing of up to 4 transmitters (SCTs)
- Integrated standard interfaces: Analog, CAN, Ethernet
- Extended Temperature available -40 °C to +125 °C (Dx-HT)
- Measurement value output in physical units available
- No authorization required for radio transmission (2.4 GHz band)
- Convenient parametrization by RemusLAB software or web browser
| Input Types | Strain Gauge, Vdc, Temperature, Frequency |
| No. of Inputs | 2-20 |
| Output | Analog, CANbus |
- Waterproof (IP66, IP67)
- Ideal for brake testing due to excellent heat dissipation
- Removable stator for convenient balancing of wheels
- Online zeroing - system is ready to measure after three turns of the wheel
- Measurement range: Fx, Fz = ±45 kN, Fy = ±25 kN, Mx, My, Mz = 8.75 kNm
- Angular resolution 0.072°
- Working temperature range (sensor): -40°C to +150°C
- Convenient parameterization with software RemusLAB
| Input Types | Strain Gauge |
| No. of Inputs | 2-20 |
| Output | Analog, Ethernet, CANbus |
- Steering torque range ±100 Nm or ±200 Nm
- Steering angle range ±1474,56°
- Rotational velocity range ±1000°/sec
- Acceleration in x, y, z (optional)
- Rotational acceleration (optional)
- CAN and analog output
- Online monitoring of all channels in physical values
- Inductive power supply by control unit
| Input Types | Strain Gauge, Vdc |
| No. of Inputs | 2-20 |
| Output | Analog, CANbus |